ObjectDataSource.DeleteParameters Propiedad
Definición
Importante
Parte de la información hace referencia a la versión preliminar del producto, que puede haberse modificado sustancialmente antes de lanzar la versión definitiva. Microsoft no otorga ninguna garantía, explícita o implícita, con respecto a la información proporcionada aquí.
Obtiene la colección de parámetros que contiene los parámetros utilizados por el método DeleteMethod.
public:
property System::Web::UI::WebControls::ParameterCollection ^ DeleteParameters { System::Web::UI::WebControls::ParameterCollection ^ get(); };[System.Web.UI.PersistenceMode(System.Web.UI.PersistenceMode.InnerProperty)]
public System.Web.UI.WebControls.ParameterCollection DeleteParameters { get; }[<System.Web.UI.PersistenceMode(System.Web.UI.PersistenceMode.InnerProperty)>]
member this.DeleteParameters : System.Web.UI.WebControls.ParameterCollectionPublic ReadOnly Property DeleteParameters As ParameterCollectionValor de propiedad
Objeto ParameterCollection que contiene los parámetros utilizados por el método DeleteMethod.
- Atributos
Ejemplos
Esta sección contiene dos ejemplos de código. En el primer ejemplo de código se muestra cómo usar un ObjectDataSource objeto con un objeto de negocio y un GridView control para eliminar datos. En el segundo ejemplo de código se muestra la EmployeeLogic clase que se usa en el primer ejemplo de código.
En el ejemplo de código siguiente se muestra cómo usar la DeleteParameters propiedad del ObjectDataSource control con un objeto de negocio y un GridView control para eliminar datos. Inicialmente, el GridView control muestra un conjunto de todos los empleados, utilizando el método especificado por la SelectMethod propiedad para recuperar los datos del EmployeeLogic objeto . Dado que la AutoGenerateDeleteButton propiedad se establece trueen , el GridView control muestra automáticamente un botón Eliminar .
Si hace clic en el botón Eliminar , se llama al Deleting evento con dos parámetros. Un parámetro, EmpID, procede del DataGrid control y se basa en la DataKeyNames propiedad . El otro parámetro procede de la propiedad declarativa DeleteParameters . La EmployeeLogic clase sobrecarga el DeleteEmployee método . Una sobrecarga toma un NorthwindEmployee parámetro y el otro toma un Int32 parámetro denominado anID. En el Deleting evento , las entradas de la InputParameters propiedad se ajustan para incluir solo un parámetro denominado anID con el valor de original_EmpID. Cuando existe el controlador de eventos, se llama al método coincidente DeleteEmployee .
En el ejemplo de código siguiente se muestra la página web que muestra el DataGrid control y controla el Deleting evento.
<%@ Register TagPrefix="aspSample" Namespace="Samples.AspNet.CS" Assembly="Samples.AspNet.CS" %>
<%@ Import namespace="Samples.AspNet.CS" %>
<%@ Page language="c#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
private void NorthwindEmployeeDeleting(object source, ObjectDataSourceMethodEventArgs e)
{
IDictionary paramsFromPage = e.InputParameters;
paramsFromPage.Remove("anID");
paramsFromPage.Add("anID", (int)paramsFromPage["EmpID"]);
paramsFromPage.Remove("EmpID");
}
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>ObjectDataSource - C# Example</title>
</head>
<body>
<form id="Form1" method="post" runat="server">
<asp:gridview
id="GridView1"
runat="server"
datasourceid="ObjectDataSource1"
autogeneratedeletebutton="true"
DataKeyNames="EmpID">
</asp:gridview>
<asp:objectdatasource
id="ObjectDataSource1"
runat="server"
selectmethod="GetAllEmployees"
deletemethod="DeleteEmployee"
OnDeleting="NorthwindEmployeeDeleting"
typename="Samples.AspNet.CS.EmployeeLogic">
<deleteparameters>
<asp:parameter name="anID" type="Int32" />
</deleteparameters>
</asp:objectdatasource>
</form>
</body>
</html>
<%@ Register TagPrefix="aspSample" Namespace="Samples.AspNet.VB" Assembly="Samples.AspNet.VB" %>
<%@ Import namespace="Samples.AspNet.VB" %>
<%@ Page language="vb" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
Private Sub NorthwindEmployeeDeleting(source As Object, e As ObjectDataSourceMethodEventArgs)
Dim paramsFromPage As IDictionary = e.InputParameters
paramsFromPage.Remove("anID")
paramsFromPage.Add("anID", CInt(paramsFromPage("EmpID")))
paramsFromPage.Remove("EmpID")
End Sub ' NorthwindEmployeeDeleting
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>ObjectDataSource - VB Example</title>
</head>
<body>
<form id="Form1" method="post" runat="server">
<asp:gridview
id="GridView1"
runat="server"
datasourceid="ObjectDataSource1"
autogeneratedeletebutton="true"
DataKeyNames="EmpID">
</asp:gridview>
<asp:objectdatasource
id="ObjectDataSource1"
runat="server"
selectmethod="GetAllEmployees"
deletemethod="DeleteEmployee"
OnDeleting="NorthwindEmployeeDeleting"
typename="Samples.AspNet.VB.EmployeeLogic">
<deleteparameters>
<asp:parameter name="anID" type="Int32" />
</deleteparameters>
</asp:objectdatasource>
</form>
</body>
</html>
En el ejemplo de código siguiente se muestra la EmployeeLogic clase que se usa en el ejemplo de código anterior.
namespace Samples.AspNet.CS {
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Data.SqlClient;
using System.Web.UI;
using System.Web.UI.WebControls;
//
// EmployeeLogic is a stateless business object that encapsulates
// the operations you can perform on a NorthwindEmployee object.
//
public class EmployeeLogic {
// Returns a collection of NorthwindEmployee objects.
public static ICollection GetAllEmployees () {
ArrayList al = new ArrayList();
// Use the SqlDataSource class to wrap the
// ADO.NET code required to query the database.
ConnectionStringSettings cts = ConfigurationManager.ConnectionStrings["NorthwindConnection"];
SqlDataSource sds
= new SqlDataSource(cts.ConnectionString,
"SELECT EmployeeID FROM Employees");
try {
IEnumerable IDs = sds.Select(DataSourceSelectArguments.Empty);
// Iterate through the Enumeration and create a
// NorthwindEmployee object for each ID.
IEnumerator enumerator = IDs.GetEnumerator();
while (enumerator.MoveNext()) {
// The IEnumerable contains DataRowView objects.
DataRowView row = enumerator.Current as DataRowView;
int id = (int) row["EmployeeID"];
NorthwindEmployee nwe = new NorthwindEmployee(id);
// Add the NorthwindEmployee object to the collection.
al.Add(nwe);
}
}
finally {
// If anything strange happens, clean up.
sds.Dispose();
}
return al;
}
public static NorthwindEmployee GetEmployee(int anID) {
return new NorthwindEmployee(anID);
}
public static void DeleteEmployee(NorthwindEmployee ne) {
bool retval = ne.Delete();
if (! retval) { throw new NorthwindDataException("Employee delete failed."); }
// Delete the object in memory.
ne = null;
}
public static void DeleteEmployee(int anID) {
NorthwindEmployee tempEmp = new NorthwindEmployee(anID);
DeleteEmployee(tempEmp);
}
}
public class NorthwindEmployee {
public NorthwindEmployee (int anID) {
this.ID = anID;
ConnectionStringSettings cts = ConfigurationManager.ConnectionStrings["NorthwindConnection"];
SqlConnection conn = new SqlConnection (cts.ConnectionString);
SqlCommand sc =
new SqlCommand(" SELECT FirstName,LastName " +
" FROM Employees " +
" WHERE EmployeeID = @empId",
conn);
// Add the employee ID parameter and set its value.
sc.Parameters.Add(new SqlParameter("@empId",SqlDbType.Int)).Value = Int32.Parse(anID.ToString());
SqlDataReader sdr = null;
try {
conn.Open();
sdr = sc.ExecuteReader();
// This is not a while loop. It only loops once.
if (sdr != null && sdr.Read()) {
// The IEnumerable contains DataRowView objects.
this.firstName = sdr["FirstName"].ToString();
this.lastName = sdr["LastName"].ToString();
}
else {
throw new NorthwindDataException("Data not loaded for employee id.");
}
}
finally {
try {
if (sdr != null) sdr.Close();
conn.Close();
}
catch (SqlException) {
// Log an event in the Application Event Log.
throw;
}
}
}
private object ID;
public object EmpID {
get { return ID; }
}
private string lastName;
public string LastName {
get { return lastName; }
set { lastName = value; }
}
private string firstName;
public string FirstName {
get { return firstName; }
set { firstName = value; }
}
public bool Delete () {
if (ID.Equals(DBNull.Value)) {
// The Employee object is not persisted.
return true;
}
else {
// The Employee object is persisted.
// Use the SqlDataSource control as a convenient wrapper for
// the ADO.NET code needed to delete a record from the database.
ConnectionStringSettings cts = ConfigurationManager.ConnectionStrings["NorthwindConnection"];
SqlDataSource sds = new SqlDataSource();
try {
sds.ConnectionString = cts.ConnectionString;
sds.DeleteCommand = "DELETE FROM Employees WHERE EmployeeID=@empID;";
sds.DeleteParameters.Add(new Parameter("empID",TypeCode.Int32,this.ID.ToString()));
/* To make this sample fully functional, uncomment these lines
int retval = sds.Delete();
if (retval == 1) { return true; }
return false; */
return true;
}
finally {
sds.Dispose();
}
}
}
}
internal class NorthwindDataException: Exception {
public NorthwindDataException(string msg) : base (msg) { }
}
}
Imports System.Collections
Imports System.Configuration
Imports System.Data
Imports System.Data.SqlClient
Imports System.Web.UI
Imports System.Web.UI.WebControls
Namespace Samples.AspNet.VB
'
' EmployeeLogic is a stateless business object that encapsulates
' the operations you can perform on a NorthwindEmployee object.
Public Class EmployeeLogic
' Returns a collection of NorthwindEmployee objects.
Public Shared Function GetAllEmployees() As ICollection
Dim al As New ArrayList()
' Use the SqlDataSource class to wrap the
' ADO.NET code required to query the database.
Dim cts As ConnectionStringSettings = ConfigurationManager.ConnectionStrings("NorthwindConnection")
Dim sds As New SqlDataSource(cts.ConnectionString, "SELECT EmployeeID FROM Employees")
Try
Dim IDs As IEnumerable = sds.Select(DataSourceSelectArguments.Empty)
' Iterate through the Enumeration and create a
' NorthwindEmployee object for each ID.
Dim enumerator As IEnumerator = IDs.GetEnumerator()
While enumerator.MoveNext()
' The IEnumerable contains DataRowView objects.
Dim row As DataRowView = CType(enumerator.Current,DataRowView)
Dim id As String = row("EmployeeID").ToString()
Dim nwe As New NorthwindEmployee(CInt(id))
' Add the NorthwindEmployee object to the collection.
al.Add(nwe)
End While
Finally
' If anything strange happens, clean up.
sds.Dispose()
End Try
Return al
End Function 'GetAllEmployees
Public Shared Function GetEmployee(anID As Integer) As NorthwindEmployee
Return New NorthwindEmployee(anID)
End Function 'GetEmployee
Public Shared Sub DeleteEmployee(ne As NorthwindEmployee)
Dim retval As Boolean = ne.Delete()
If Not retval Then
Throw New NorthwindDataException("Employee delete failed.")
End If ' Delete the object in memory.
ne = Nothing
End Sub
Public Shared Sub DeleteEmployee(anID As Integer)
Dim tempEmp As New NorthwindEmployee(anID)
DeleteEmployee(tempEmp)
End Sub
' And so on...
End Class
Public Class NorthwindEmployee
Public Sub New(anID As Integer)
Me.ID = anID
Dim cts As ConnectionStringSettings = ConfigurationManager.ConnectionStrings("NorthwindConnection")
Dim conn As New SqlConnection(cts.ConnectionString)
Dim sc As New SqlCommand(" SELECT FirstName,LastName " & _
" FROM Employees " & _
" WHERE EmployeeID = @empId", conn)
' Add the employee ID parameter and set its value.
sc.Parameters.Add(New SqlParameter("@empId", SqlDbType.Int)).Value = Int32.Parse(anID.ToString())
Dim sdr As SqlDataReader = Nothing
Try
conn.Open()
sdr = sc.ExecuteReader()
' This is not a while loop. It only loops once.
If Not (sdr Is Nothing) AndAlso sdr.Read() Then
' The IEnumerable contains DataRowView objects.
Me.firstName = sdr("FirstName").ToString()
Me.lastName = sdr("LastName").ToString()
Else
Throw New NorthwindDataException("Data not loaded for employee id.")
End If
Finally
Try
If Not (sdr Is Nothing) Then
sdr.Close()
End If
conn.Close()
Catch se As SqlException
' Log an event in the Application Event Log.
Throw
End Try
End Try
End Sub
Private ID As Object
Public ReadOnly Property EmpID() As Object
Get
Return ID
End Get
End Property
Private aLastName As String
Public Property LastName() As String
Get
Return aLastName
End Get
Set
aLastName = value
End Set
End Property
Private aFirstName As String
Public Property FirstName() As String
Get
Return aFirstName
End Get
Set
aFirstName = value
End Set
End Property
Public Function Delete() As Boolean
If ID.Equals(DBNull.Value) Then
' The Employee object is not persisted.
Return True
Else
' The Employee object is persisted.
' Use the SqlDataSource control as a convenient wrapper for
' the ADO.NET code needed to delete a record from the database.
Dim cts As ConnectionStringSettings = ConfigurationManager.ConnectionStrings("NorthwindConnection")
Dim sds As New SqlDataSource()
Try
sds.ConnectionString = cts.ConnectionString
sds.DeleteCommand = "DELETE FROM Employees WHERE EmployeeID=@empID;"
Dim param As New Parameter("empID", TypeCode.Int32, CStr(Me.ID))
sds.DeleteParameters.Add(param)
' To make this sample fully functional, uncomment these lines
' int retval = sds.Delete();
' if (retval == 1) { return true; }
' return false;
Return True
Finally
sds.Dispose()
End Try
End If
End Function 'Delete
End Class
Friend Class NorthwindDataException
Inherits Exception
Public Sub New(msg As String)
MyBase.New(msg)
End Sub
End Class
End Namespace
Comentarios
Los nombres y tipos de los parámetros contenidos en la DeleteParameters colección deben coincidir con los nombres y tipos de los parámetros de la firma del DeleteMethod método. Los nombres de parámetro se ven afectados por la OldValuesParameterFormatString propiedad y distinguen mayúsculas de minúsculas. Los parámetros de la colección dependen de los datos que se encuentran en el control enlazado a datos, de los parámetros especificados mediante declaración y de los parámetros que se agregan mediante programación. Para obtener más información, vea "Combinación de parámetros" en Delete y Uso de parámetros con el control ObjectDataSource.
La DeleteParameters propiedad recupera la DeleteParameters propiedad contenida por el ObjectDataSourceView objeto asociado al ObjectDataSource control .
Para obtener más información sobre la combinación de parámetros, la duración del objeto y la resolución de métodos, vea DeleteMethod.
Se aplica a
Consulte también
Comentarios
Próximamente: A lo largo de 2024 iremos eliminando gradualmente GitHub Issues como mecanismo de comentarios sobre el contenido y lo sustituiremos por un nuevo sistema de comentarios. Para más información, vea: https://aka.ms/ContentUserFeedback.
Enviar y ver comentarios de