DataSet.CreateDataReader Methode

Definition

Gibt einen DataTableReader mit einem Resultset pro DataTable zurück, und zwar in der Reihenfolge der Tabellen in der Tables-Auflistung.

Überlädt

CreateDataReader(DataTable[])

Gibt einen DataTableReader mit einem Resultset pro DataTable zurück.

CreateDataReader()

Gibt einen DataTableReader mit einem Resultset pro DataTable zurück, und zwar in der Reihenfolge der Tabellen in der Tables-Auflistung.

Beispiele

In diesem Beispiel, einer Konsolenanwendung, werden drei DataTable Instanzen erstellt und jeder einer DataSethinzugefügt. Das Beispiel ruft die CreateDataReader -Methode auf und zeigt den Inhalt des zurückgegebenen DataTableReaderan. Beachten Sie, dass die Reihenfolge der Resultsets im DataTableReader durch die Reihenfolge der DataTable als Parameter übergebenen Instanzen gesteuert wird.

Hinweis

In diesem Beispiel wird gezeigt, wie Sie eine der überladenen Versionen von CreateDataReaderverwenden. Weitere Beispiele, die möglicherweise verfügbar sind, finden Sie in den einzelnen Überladungsthemen.

static DataTable customerTable;
static DataTable productTable;
static DataTable emptyTable;

static void Main()
{
    DataSet dataSet = new DataSet();

    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    emptyTable = new DataTable();
    productTable = GetProducts();
    customerTable = GetCustomers();

    dataSet.Tables.Add(customerTable);
    dataSet.Tables.Add(emptyTable);
    dataSet.Tables.Add(productTable);
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data.
    // Even though the dataset contains three DataTables,
    // this code will only display the contents of two of them,
    // because the code has limited the results to the
    // DataTables stored in the tables array. Because this
    // parameter is declared using the ParamArray keyword,
    // you could also include a list of DataTable instances
    // individually, as opposed to supplying an array of
    // DataTables, as in this example:
    using (DataTableReader reader =
        dataSet.CreateDataReader(productTable, emptyTable))
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    table.AcceptChanges();
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    table.AcceptChanges();
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}
Private emptyTable As DataTable
Private customerTable As DataTable
Private productTable As DataTable

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:

  emptyTable = New DataTable()
  productTable = GetProducts()
  customerTable = GetCustomers()

  dataSet.Tables.Add(customerTable)
  dataSet.Tables.Add(emptyTable)
  dataSet.Tables.Add(productTable)
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data.
  ' Even though the dataset contains three DataTables,
  ' this code will only display the contents of two of them,
  ' because the code has limited the results to the 
  ' DataTables stored in the tables array. Because this
  ' parameter is declared using the ParamArray keyword, 
  ' you could also include a list of DataTable instances 
  ' individually, as opposed to supplying an array of 
  ' DataTables, as in this example:
  Using reader As DataTableReader = _
      dataSet.CreateDataReader(productTable, emptyTable)
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  table.AcceptChanges()
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  table.AcceptChanges()
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

Im Beispiel wird der folgende Code im Konsolenfenster angezeigt:

Hinweise

Um die Reihenfolge der Resultsets innerhalb des zurückgegebenen DataTableReadersicherzustellen, wird es DataTableDataSet durch ein leeres Resultset innerhalb des zurückgegebenen DataTableReaderdargestellt.

CreateDataReader(DataTable[])

Quelle:
DataSet.cs
Quelle:
DataSet.cs
Quelle:
DataSet.cs

Gibt einen DataTableReader mit einem Resultset pro DataTable zurück.

public:
 System::Data::DataTableReader ^ CreateDataReader(... cli::array <System::Data::DataTable ^> ^ dataTables);
public System.Data.DataTableReader CreateDataReader (params System.Data.DataTable[] dataTables);
member this.CreateDataReader : System.Data.DataTable[] -> System.Data.DataTableReader
Public Function CreateDataReader (ParamArray dataTables As DataTable()) As DataTableReader

Parameter

dataTables
DataTable[]

Ein Array von DataTables, das die Reihenfolge der im DataTableReader zurückzugebenden Resultsets angibt.

Gibt zurück

Ein DataTableReader mit einem oder mehreren Resultsets, die den im Quell-DataTable enthaltenen DataSet-Instanzen entsprechen. Die Resultsets werden in der vom dataTables-Parameter angegebenen Reihenfolge zurückgegeben.

Beispiele

In diesem Beispiel, einer Konsolenanwendung, werden drei DataTable Instanzen erstellt und jeder einer DataSethinzugefügt. Das Beispiel ruft die CreateDataReader -Methode auf und zeigt den Inhalt des zurückgegebenen DataTableReaderan. Beachten Sie, dass die Reihenfolge der Resultsets im DataTableReader durch die Reihenfolge der DataTable als Parameter übergebenen Instanzen gesteuert wird. Im Beispiel werden die Ergebnisse im Konsolenfenster angezeigt.

static DataTable customerTable;
static DataTable productTable;
static DataTable emptyTable;

static void Main()
{
    DataSet dataSet = new DataSet();

    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    emptyTable = new DataTable();
    productTable = GetProducts();
    customerTable = GetCustomers();

    dataSet.Tables.Add(customerTable);
    dataSet.Tables.Add(emptyTable);
    dataSet.Tables.Add(productTable);
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data.
    // Even though the dataset contains three DataTables,
    // this code will only display the contents of two of them,
    // because the code has limited the results to the
    // DataTables stored in the tables array. Because this
    // parameter is declared using the ParamArray keyword,
    // you could also include a list of DataTable instances
    // individually, as opposed to supplying an array of
    // DataTables, as in this example:
    using (DataTableReader reader =
       dataSet.CreateDataReader(productTable, emptyTable))
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}
Private emptyTable As DataTable
Private customerTable As DataTable
Private productTable As DataTable

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:

  emptyTable = New DataTable()
  productTable = GetProducts()
  customerTable = GetCustomers()

  dataSet.Tables.Add(customerTable)
  dataSet.Tables.Add(emptyTable)
  dataSet.Tables.Add(productTable)
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data.
  ' Even though the dataset contains three DataTables,
  ' this code will only display the contents of two of them,
  ' because the code has limited the results to the 
  ' DataTables stored in the tables array. Because this
  ' parameter is declared using the ParamArray keyword, 
  ' you could also include a list of DataTable instances 
  ' individually, as opposed to supplying an array of 
  ' DataTables, as in this example:
  Using reader As DataTableReader = _
    dataSet.CreateDataReader(productTable, emptyTable)
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

Hinweise

Um sicherzustellen, dass die Reihenfolge der Resultsets innerhalb des zurückgegebenen DataTableReaderist, wenn ein DataTable innerhalb von DataSet leer ist, wird es durch ein leeres Resultset innerhalb des zurückgegebenen DataTableReaderdargestellt. Da Sie mit dieser überladenen Version eine Liste von DataTable Instanzen als Parameter angeben können, können Sie die Reihenfolge angeben, in der die Resultsets innerhalb des zurückgegebenen DataTableReaderangezeigt werden.

Weitere Informationen

Gilt für:

CreateDataReader()

Quelle:
DataSet.cs
Quelle:
DataSet.cs
Quelle:
DataSet.cs

Gibt einen DataTableReader mit einem Resultset pro DataTable zurück, und zwar in der Reihenfolge der Tabellen in der Tables-Auflistung.

public:
 System::Data::DataTableReader ^ CreateDataReader();
public System.Data.DataTableReader CreateDataReader ();
member this.CreateDataReader : unit -> System.Data.DataTableReader
Public Function CreateDataReader () As DataTableReader

Gibt zurück

Ein DataTableReader mit einem oder mehreren Resultsets, die den im Quell-DataTable enthaltenen DataSet-Instanzen entsprechen.

Beispiele

Im folgenden Beispiel werden drei DataTable Instanzen erstellt und jeder einer DataSethinzugefügt. Das Beispiel übergibt dann die ausgefüllte DataSet an eine Prozedur, die die CreateDataReader -Methode aufruft, und durchlaufen alle in der DataTableReaderenthaltenen Resultsets. Im Beispiel werden die Ergebnisse im Konsolenfenster angezeigt.

static void Main()
{
    DataSet dataSet = new DataSet();
    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    dataSet.Tables.Add(GetCustomers());
    dataSet.Tables.Add(new DataTable());
    dataSet.Tables.Add(GetProducts());
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data:
    using (DataTableReader reader = dataSet.CreateDataReader())
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}
Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:
  dataSet.Tables.Add(GetCustomers())
  dataSet.Tables.Add(New DataTable())
  dataSet.Tables.Add(GetProducts())
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data:
  Using reader As DataTableReader = dataSet.CreateDataReader()
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

Hinweise

Um die Reihenfolge der Resultsets innerhalb des zurückgegebenen DataTableReadersicherzustellen, wird es DataTableDataSet durch ein leeres Resultset innerhalb des zurückgegebenen DataTableReaderdargestellt.

Weitere Informationen

Gilt für: