Readme: Microsoft Visual Studio 2005 Setup Issues
This document lists issues that concern installation, uninstallation, repair, and other setup procedures.
1. Issues for all Visual Studio Products
2. Microsoft .NET Framework
3. Smart Device Programmability
4. Crystal Reports
1. All Visual Studio Products
1.1. System Requirements
| System Requirements for Installing Visual Studio 2005 | |
|---|---|
| Processor |
Minimum:
Recommended:
|
| Operating System |
Visual Studio 2005 can be installed on any of the following systems:
Installation of Visual Studio 2005 on the Intel Itanium (IA64) is not supported. |
| RAM 1 |
Minimum:
Recommended:
|
| Hard Disk 2 |
Without MSDN:
With MSDN:
|
| CD or DVD Drive | Not required |
| Display |
Minimum:
Recommended:
|
| Mouse | Microsoft mouse or compatible pointing device |
Notes
Performance has not been tuned for minimum system configuration. Increasing your computer's RAM will improve its performance, especially when running multiple applications, working with large projects, or doing enterprise-level development.
For Visual Studio Tools for Office features, 256 megabytes of RAM is required. This requirement only applies to Microsoft Visual Studio 2005 Team Edition for Software Architects, Microsoft Visual Studio 2005 Team Edition for Software Developers, Microsoft Visual Studio 2005 Team Edition for Software Testers, and Microsoft Visual Studio 2005 Team Suite.
When you start the Visual Studio 2005 installer, the default installation location is your system drive, which is the drive that boots your system. However, you can install the application on any drive. Regardless of the application's location, the installation process installs some files on your system drive. Consequently, ensure that the above amount of space is available on your system drive regardless of the application's location, and ensure that additional space, as listed above, is available on the drive on which you install the application.
.gif "Top of Page")
Top of Page
1.2. Upgrade from previous releases of Visual Studio 2005
For best results, install on a computer that has not had pre-release versions of SQL 2005, Visual Studio 2005, or the .NET Framework 2.0 installed on it.
If your computer has any of the pre-release versions on it, they must be removed in the correct order BEFORE you begin installing the release version. This process is not officially supported. More information on the uninstall process.
- Go to the Control Panel and launch Add/Remove Programs
- Remove all SQL Server 2005 products
- Either run the uninstall tool, or follow the manual uninstall instructions below
- Install the Visual Studio 2005 product or products you wish to use
Most pre-release projects can be carried forward to the release version. Here are details on any changes needed for forward compatibility. If you have problems, take a look at this link or report your specific issue on the Visual Studio Forums.
Uninstall Tool
Warning: This Auto-Uninstall Tool uninstalls ALL pre-release Visual Studio 2005 products, including Visual Studio Express Editions, Visual Studio Team System, Visual Studio Professional, and Visual Studio Standard.
Manual Uninstall Instructions
If you decide to uninstall manually, without using the tool, be sure you **uninstall ALL Visual Studio 2005 product editions BEFORE you uninstall the .NET Framework 2.0. **
- Go to the Control Panel and launch Add/Remove Programs
- Remove "MSDN Library for Visual Studio 2005 Beta"
- Remove "Microsoft SQL Server 2005 Express Edition"
- Remove "Microsoft SQL Server 2005 Tools Express Edition"
- Remove "Microsoft SQL Native Client"
- Remove "Microsoft Visual Studio 64bit Prerequisites Beta" (This step is needed only if Visual Studio is installed on a 64-bit machine)
- Remove "Microsoft Visual Studio Tools for Office System 2005 Runtime Language Pack" (This step is not needed if you have only the English Edition)
- Remove "Microsoft Visual Studio Tools for Office System 2005 Runtime Beta"
- Remove "DMA Transport Update for VS 2005 Beta 2"
- Remove "Microsoft Device Emulator 1.0 Beta"
- Remove "Microsoft .NET Compact Framework 2.0 Beta"
- Remove "Microsoft .NET Compact Framework 1.0"
- Remove "Microsoft Visual Studio 2005 Professional" or other related IDE installs such as (Visual Studio Professional/Standard/Enterprise Architect/Team Suite, etc.)
- Remove "Microsoft Document Explorer 2005 Language Pack" (This step is not needed if you have only the English Edition)
- Remove "Microsoft Document Explorer 2005" (This step is needed for post-Beta2 builds)
- Remove "Microsoft SQL Mobile 2005 Development Tools"
- Remove "Microsoft 64-bit SDK" (This step is only needed if Visual Studio is installed on a 64-bit machine)
- Remove "Microsoft Visual Studio 2005 Remote Debugger (x64)" (This step is needed only if Visual Studio is installed on a 64-bit machine)
- Remove "Microsoft MDAC 2.8 SP1" (This step is needed only if you are running Windows 2000)
- Remove "Microsoft MSXML 6 SDK and Parser"
- Remove "Microsoft Visual J# .NET Redistributable 2.0 Beta Language Pack" (This step is not needed if you have only the English Edition)
- Remove "Microsoft Visual J# Redistributable Package 2.0 Beta"
- Ensure all Visual Studio 2005 products have been removed from your system
- Remove "Microsoft .NET Framework 2.0 Beta Language pack" (This step is not needed if you have only the English Edition)
- Remove "Microsoft .NET Framework 2.0 Beta"
Install the Visual Studio Edition or Editions you wish to use.
1.3. Product Installation
1.3.1 Installation of Visual Studio 2005 on the Intel Itanium (IA64) is not supported.
Visual Studio 2005 does not support the Intel Itanium (IA64) processor.
To resolve this issue
If you need to develop Itanium applications, install Visual Studio on another computer and use the cross compilers to target the Itanium platform.
1.3.2 SQL Express installation fails when pre-released SQL Express components are not uninstalled
SQL Express component setup will fail if any of the following pre-released SQL Express components are left on the computer:
In most cases, setup only displays a list of Beta components detected on the targeted computer. However, SQL Express components will always appear in this list if any other Beta components are detected. In other words, these SQL Express components could appear in the list even after the user uninstalls them.
To resolve this issue
Ensure the matching .NET Framework Beta is on the computer before performing the following steps:
1) Remove "Microsoft SQL Server 2005 Express Edition"
2) Remove "Microsoft SQL Server 2005 Tools Express Edition"
3) Remove "Microsoft SQL Native Client"
You may ignore the Beta warning message about these components if they were uninstalled previously.
1.3.3 Setup fails when installing from a mounted drive in a Virtual PC environment
When installing Visual Studio 2005 on a Virtual PC, setup fails because it cannot access certain files.
This happens when the drive is mounted using the CD Drive mount software provided with Virtual PC or your Visual Studio 2005 media is a DVD because the mounting software can only support 2.2 Gigabytes of data.
To resolve this issue
You can use a third-party DVD Drive mounting software. Alternatively, you can copy the contents of the Visual Studio 2005 DVD to your computer's hard drive, share the folder with your Virtual PC, and then direct Visual Studio 2005 installation setup to the folder.
1.3.4 Installing Visio for Enterprise Architects reverts some Office 2003 files to SP1.
On a system with Office 2003 SP2 or later, installing Visio for Enterprise Architects reverts three files shared with Office to SP1 versions. This also occurs with certain downloaded and installed updates to Office 2003 SP1. The affected files are MSSP3EN.LEX, MSSP3ENA.LEX, and FPEXT.MSG. No known serious functionality issues result from changes to these files.
To resolve this issue
From an Office application, run the "Detect and Repair" command from the Help menu. This restores the affected files to their correct versions.
1.3.5 Installing Visual Studio 2005 using the runas command fails.
Unless you are logged in as an administrator, using the runas command to install Visual Studio 2005 is not supported and will fail. Running Visual Studio 2005 after it is installed is supported for non-administrators.
To resolve this issue
Log in as an administrator to install Visual Studio 2005.
1.3.6 Installing Visual Studio 2005 from CD fails. A network installation is requested.
The media that Visual Studio 2005 shipped on may be bad, preventing a successful installation.
To resolve this issue
Visual Studio 2005 setup may be run from a network share as an alternative to running setup from CDs or DVDs. The following procedure illustrates how to prepare Visual Studio 2005 for installation from a network share. The procedure refers to the Visual Studio 2005 CDs, but the steps are the same for DVDs.
1) Create a folder (for example, VS2005) on the server.
2) Create two subfolders, named VS, and MSDN within the top-level folder. For example:
VS2005\VS
VS2005\MSDN.
3) Copy the contents of the Visual Studio 2005 CDs into the VS2005\VS folder. Select Yes if prompted to overwrite any existing files.
4) Copy the contents from all the CDs labeled MSDN Library for Visual Studio 2005 to the subfolder named MSDN. Select Yes if prompted to overwrite any existing files.
5) Open Setup.ini in the VS subfolder using a text editor, such as Notepad.
6) In the [Documentation] section, change the line that starts with "DIR=" as follows:
[Documentation]
DIR=..\MSDN
7) Save your changes and close the file.
Note Completing this step prevents disk-swapping requests during setup and informs the setup program of the correct path to the MSDN Library CDs.
8) In the VS subfolder, open the Setup folder.
9) Open setup.sdb in a text editor, such as Notepad, and add the following lines to the end of the file:
[Product Key]
XXXXXXXXXXXXXXXXXXXXXXXXX
Note XXXXXXXXXXXXXXXXXXXXXXXXX is the 25 digit product key, entered without dashes, found on the CD packaging.
10) Save your changes and close the file.
Note Completing this step enables pre-populating the product key for the user who will install from the network share.
11) Share the VS2005 folder on the network and set the appropriate security settings. The path to Visual Studio 2005 setup from the network looks like \\[servername]\VS2005\VS\setup.exe
Note Setup will fail if any path and file name combination exceeds 260 characters. The maximum length of a path in Visual Studio is 221 characters. You should copy files to a path with less than 70 characters. If you create a network share for a network image, the UNC path to the root installation location should contain fewer than 39 characters.
Note Setup might fail if the folder names in this path include embedded spaces, for example:
\\[servername]\VS2005\MSDN\
\\[servername]\VS2005\Visual Studio\
1.3.7 Installing any edition of Visual Studio 2005 from an installation path that is longer 100 characters fails on Windows 2000.
When setup is launched from a path that is longer than 100 characters, setup fails due to a maximum path limitation in Windows 2000. Path length is not an issue on Windows XP or Windows 2003 Server.
To resolve this issue
When installing from a network, map the network path to a local drive and install from that drive. For example, if the path is \\computername\programs\test folder\development tools\external\Microsoft\Visual Studio 2005\beta release, you can map it to a network drive by doing the following:
1) From the Start menu, choose Run.
2) Type cmd and then click OK.
3) At the command prompt, type the following:
net use * "\\computername\programs\test folder\development tools\external\Microsoft\Visual Studio 2005\beta release"
Windows maps the network drive for you. The drive letter is displayed in the console window.
When installing from a local folder, copy the contents of Visual Studio to another folder on the computer that has a total path length of less than 100 characters.
Note: If you install Visual Studio from a CD or DVD, you will not encounter any path length issues.
1.3.8 Warning dialog appears when uninstalling MSXML 6.0.
To completely uninstall Visual Studio, you must manually uninstall MSXML 6.0 using Add or Remove Programs. During uninstall for MSXML 6.0, the following warning may appear:
Warning 26002. The following product(s) is dependent on MSXML 6.0. If you uninstall MSXML 6.0, they will be broken. Please uninstall those product(s) first. Do you want to go ahead to uninstall MSXML 6.0 anyway?
Microsoft SQL Server 2005 Express Edition Beta 2 (SQLEXPRESS)
Microsoft SQL Server 2005 Tools Express Edition Beta 2
To resolve this issue
You must manually uninstall all of the products listed in the warning before you uninstall MSXML 6.0.
Any SQL Server products that need to be uninstalled are listed on the final page displayed after Visual Studio is uninstalled. If products other than SQL Server are listed in the warning text, those products also will need to be uninstalled before you uninstall MSXML 6.0.
1.3.9 Installation path cannot accept non-ANSI characters on Japanese MUI OS.
On JPN MUI OS, when installing Visual Studio Team Suite to path with non-ANSI characters such as "c:\program files\? ? ? ? ? ? ? ? Microsoft Visual Studio 8", a dialog box pops up saying "can't accept non-ANSI characters".
This problem occurs on all JPN MUI OS (including Windows 2000, Windows 2003 and Windows XP series operating systems). It does not occur on JPN OS.
To resolve this issue
Use ANSI characters for the destination path.
1.3.10 Internet Explorer Script Error! An error has occurred in the script on this page.
This error, and "Could not complete the operation due to error 887600de", might be encountered while installing Visual Studio Standard on Windows 2000 with Service Pack 4. This error occurs on computers with low color depth. This error occurs on machines with low color depth.
To resolve this issue
Enable more colors:
1. Cancel Visual Studio install.
2. Right click on the desktop wallpaper.
3. Click on Properties.
4. Click the Settings tab.
5. Adjust the Color Quality to a higher setting.
6. Click OK
7. Install Visual Studio again.
1.3.11 Load Test Agent installs only if controller is running.
Installation of Team Load Test Agent will fail if the specified controller is not running. To verify this problem, examine AgentConfigUtil.exe.log in \Program Files\Microsoft Visual Studio 8\Microsoft Visual Studio Team Suite\LoadTest directory.
To resolve this issue
Ensure that the controller is installed and the service is running, and then try the installation again.
1.3.12 Installing Microsoft Office 2003 Primary Interop Assemblies
You want to install the Microsoft Office 2003 Primary Interop Assemblies after you have finished installing Visual Studio 2005, but you do not know how to install them.
To resolve this issue
1. On the installation media, navigate to the \setup folder.
2. Open PIAInstall.htm and follow the instructions listed.
1.3.13 Antivirus applications that are configured to clean the Temp folder might cause setup to fail
If setup needs to reboot and your antivirus application is set to clean the Temp folder on launch, necessary setup files will be deleted and setup will fail due to a program-not-found error.
To resolve this issue
Before running Visual Studio setup, reset the antivirus application to leave Temp folder contents intact on launch or reboot. Reference your Antivirus help documentation for steps on how to do this.
1.3.14 Setup does not check disk space when auto-launching after selecting "reboot later".
When reboot later is selected and the available space on the hard drive is filled beyond the amount of space needed by setup, an out-of-space error will occur after reboot.
To resolve this issue
Ensure that enough disk space will be available by rebooting before installing or opening other applications. The required disk space is displayed when you select the location to install the product.
1.3.15 Removing the .NET Framework breaks SQL Server 2005 and MSDN Express Library.
You must uninstall SQL Server 2005 and MSDN Library before uninstalling .NET Framework 2.0 or you will encounter an error. You can install newer versions of SQL Server 2005 or MSDN Library only after removing all previous SQL Server 2005 components and MSDN library components, as listed below.
To resolve this issue
1. From the Control Panel, select Add or Remove Programs.
2. Select SQL Server 2005 components and click Remove to remove each component below.
- Remove "Microsoft SQL Server 2005 Express Edition"
- Remove "Microsoft SQL Server 2005 Tools Express Edition"
- Remove "Microsoft SQL server setup support files"
- Remove "Microsoft XML 6.0"
- Remove "Microsoft SQLXML 4.0"
- Remove "Microsoft SQL Native Client"
- Remove "Microsoft MSDN library"
3. Select the .NET Framework 2.0 and click Remove.
4. Install SQL Server 2005.
Note: If you remove the Beta .NET Framework 2.0 before removing all SQL Server 2005 components or MSDN Library, you must reinstall .NET Framework 2.0 before you can successfully perform the steps above.
1.3.16 After being uninstalled, SQL Server Express requires a reboot before it can successfully reinstall.
When all SQL Server Express components are uninstalled, and then SQL Server Express is reinstalled via Maintenance Mode (for VSTS, you will need to install MSXML 6.0 first), the reinstallation fails. No cause is written to the VS logs.
To resolve this issue
After uninstalling SQL Server Express, reboot the computer before reinstalling it.
1.3.17 Customers who wish to use Visual Studio 2005 Tools for Microsoft Office projects need to install Office and SP1 before installing Visual Studio Team System
The issue is that VSTO 2.0 features require an updated OtkLoader instead of the version that came with Office 2003.
When VSTS is installed, the VSTO runtime (which includes the updated OtkLoader) is installed. If Office is present at installation time, OtkLoader is updated and everything will function as expected. However, if Office is not present, OtkLoader cannot be updated. Users must then install Office SP1 and run VSTOR.EXE to update OtkLoader manually.
To resolve this issue
Run VSTOR.EXE to update the version of OtkLoader.
1.3.18 C++ Itanium Native Tools Setup Requirement for MFC and .NET Windows Forms Integrations
In order to develop applications that combine MFC and .NET Windows Forms you will need to follow an additional step.
To resolve this issue
Manually install mfcmifc80.dll to the Global Assembly Cache using the gacutil.exe.
1.3.19 C++ Tools for Itanium Setup Location for Itanium Redistributables
The redistributable files for Itanium are installed to the incorrect location during the Visual Studio Tools for 64-bit Setup (available only in Visual Studio Team System products).
To resolve this issue
You can find the Itanium redistributables in the Microsoft Visual Studio 2005\VC\Redist\x86 folder.
1.3.20 Running a Bootstrapper on a Russian Operating System renders some characters incorrectly.
If you localize a ClickOnce or Setup Project to Russian, the Bootstrapper (setup.exe) will not display text correctly in the EULA or Error Details dialog.
To resolve this issue
The problem is that the wrong CharSet value is used. To resolve the issue please do the following:
1. Open the setup.xml file at [.NET SDK Install Dir]\Bootstrapper\Engine\ru\seup.xml
2. Go to the bottom of the file and edit the CharSet Element's value. Change it from 0 to 204
3. Save the file.
4. Rebuild / Republish your application
1.3.21 Setup fails when installing from a mounted drive in a Virtual PC environment
When installing Visual Studio 2005 on a Virtual PC, setup fails because it cannot access certain files.
This happens when the drive is mounted using the CD Drive mount software provided with Virtual PC or your Visual Studio 2005 media is a DVD because the mounting software can only support 2.2 Gigabytes of data.
To resolve this issue
You can use a third-party DVD Drive mounting software. Alternatively, you can copy the contents of the Visual Studio 2005 DVD to your computer's hard drive, share the folder with your Virtual PC, and then direct Visual Studio 2005 installation setup to the folder.
1.3.22 Reboot is required after uninstalling SQL Server Express in order to successfully reinstall SQL Server Express.
When uninstall SQL Server Express and then reinstalling SQL Server Express, you must reboot the machine after the uninstall.
To resolve this issue
Reboot machine after uninstall completes.
1.3.23 Uninstall SQL Server Express removes MSXML 6.0.
When SQL Server Express is removed from your machine, MSXML 6.0 is already removed.
MSXML 6.0 is a prerequisite for Visual Studio so some features may stop working after SQL Server Express is uninstalled.
To resolve this issue
Reinstall SQL Server Express or install MSXML 6.0.
Both installers are available on the media in the \wcu folder.
1.3.24 Visual Studio Class Designer Package load failure in Visual Studio 2005 after beta 2 uninstall.
These 2 assemblies are installed by Visual Studio 2005 but shipped in beta 2 with no file version information.
- Microsoft.VisualStudio.EnterpriseTools.ClassDesigner.dll
- Microsoft.VisualStudio.EnterpriseTools.SdmDesigners.dll
When .NET Framework 2.0 beta 2 is uninstalled before VS 2005 beta 2, these assemblies are left in the GAC. When you try to use features in the Visual Studio IDE that rely upon these assemblies, you can receive package load failures. For example, if you open a C# Windows Application and right-click on a .cs file and choose View Class Diagram, you will receive a package load failure error for the Visual Studio Class Designer Package.
To resolve this issue
- From a cmd prompt, run del %windir%\assembly\GAC_MSIL\Microsoft.VisualStudio. EnterpriseTools.ClassDesigner\ 8.0.0.0__b03f5f7f11d50a3a\ Microsoft.VisualStudio.EnterpriseTools.ClassDesigner.dll
- From a cmd prompt, run del %windir%\assembly\GAC_MSIL\Microsoft.VisualStudio. EnterpriseTools.SdmDesigners\ 8.0.0.0__b03f5f7f11d50a3a\ Microsoft.VisualStudio.EnterpriseTools.SdmDesigners.dll
- Extract the file FL_Microsoft_VisualStudio_EnterpriseTools__66768_____X86.3643236F_FC70_11D3_A536_0090278A1BB8 from the file _9160_RTL_x86_enu_WH_ED_AppDesigner.cab on the root of the VS DVD and rename it to Microsoft.VisualStudio.EnterpriseTools.SdmDesigners.dll
- Extract the file FL_Microsoft_VisualStudio_EnterpriseTools__92325_____X86.3643236F_FC70_11D3_A536_0090278A1BB8 from the file _15679_RTL_x86_enu_Whitehorse_Baseline.cab on the root of the VS DVD and rename it to Microsoft.VisualStudio.EnterpriseTools.ClassDesigner.dll
- From a cmd prompt, run %programfiles%\Microsoft Visual Studio 8\SDK\v2.0\bin\gacutil.exe /if Microsoft.VisualStudio.EnterpriseTools.SdmDesigners.dll
- From a cmd prompt, run %programfiles%\Microsoft Visual Studio 8\SDK\v2.0\bin\gacutil.exe /if Microsoft.VisualStudio.EnterpriseTools.ClassDesigner.dll
1.3.25 MDAC Setup fails during Visusal Studio Setup installation.
System Management Server may cause a conflict or sequence error while running Visual Studio setup. When MDAC is being installed as part of Visual Studio 2005, it will just fail without notifying Visual Studio.
To resolve this issue
Reboot your computer and run setup again.
1.3.26 SQL Express fails when trying to install to a compressed folder.
Microsoft SQL Express cannot install to a compressed folder.
To resolve this issue
Either uncompress the folder or install to a different location.
Top of Page
2. Microsoft .NET Framework
2.1. Product Installation
2.1.1 ngen.exe might fail with REGDB_E_CLASSNOTREG or RPC_S_SERVER_UNAVAILABLE.
ngen.exe occasionally fails with REGDB_E_CLASSNOTREG or RPC_S_SERVER_UNAVAILABLE.
The failure usually happens if you issue consecutive ngen commands back to back. Retry or reboot might help as long as you wait 15 minutes or so between two ngen commands. However, reboot does not fix the general problem and you might encounter it again
To resolve this issue
Install DCOM 98 patch from here: DCOM98Patch
2.1.2 Installing SDK hangs at "setup is configuring the install…”.
Installation hangs for about an hour or more at "setup is configuring the install..." and then gives the error message "invalid directory"
This problem is caused by a lack of available disk space.
To resolve this issue
Free up sufficient space on the disk drive.
2.1.3 x64 .NET Framework Language Pack 2.0 ProductVersion says 1.1.##### instead of 2.0.#####
When deployed thru Active Directory, the language pack version number is displayed in the Group Policy Object - Software installation table. This can be confusing when the product name states "2.0" but the version data says "1.1"
To resolve this issue
There is no known resolution.
2.1.4 Installing Windows Server 2003, followed by the .NET Framework 2.0, and then upgrading to Windows Server 2003 SP1 using a full CD, breaks .NET Framework 2.0 applications.
Upgrading using a CD with the full Windows Server 2003 SP1 installation replaces the shared file mscoree.dll on the user's computer with the .NET Framework 1.1 mscoree.dll file.
As a result, applications compiled against the .NET Framework 2.0 will fail to run after the Service Pack is installed.
Note, this does not happen when Windows Server 2003 is updated with just the Service Pack.
To resolve this issue
After installing the Windows Server 2003 Service Pack, the .NET Framework needs to be repaired.
1. From the Control Panel, select Add or Remove Programs.
2. Select Microsoft .Net Framework 2.0.
3. Click Change/Remove.
4. When the dialog appears, select Repair and click Next.
5. If prompted to do so, reboot the computer.
2.1.5 Installing on 64-bit OS when IIS 6 is in WoW64 mode will disable ASP.NET 1.1 in IIS.
Existing ASP.NET 1.1 applications will be disabled when the 64-bit .NET Framework 2.0 is installed on a 64-bit operating system that has IIS6 in WoW64 mode and ASP.NET 1.1 enabled. This happens because the Framework setup incorrectly maps the aspnet_filter to the 64-bit version and removes version 1.1 of the aspnet_isapi extension.
To resolve this issue
You must manually change IIS to use the 32-bit version of the aspnet_filter and reinstall the ASP.NET 1.1 ISAPI extension.
1. Start Internet Information Services Manager (inetmgr.exe).
2. Expand the local computer node, then click the Web Sites node.
3. From the Action menu, select Properties.
4. In the Web Site Properties dialog box, select the ISAPI Filters tab.
5. In the list of filters, select the ASP.NET 2.0 filter and click Remove.
6. Click Add and then enter the following:
Filter Name: ASP.NET_ 1.1.4322
Executable: C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_filter.dll
7. Click OK.
8. Under the Local Computer node, click the Web Service Extensions node.
9. Under Tasks, click Add a new Web Service Extension.
10. In the New Web Service Extension dialog box, enter the following:
Extension Name: ASP.NET v1.1.4322
For Required files, click Add... and then enter: C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_isapi.dll
Check Set Extension status to Allowed.Click OK.
2.1.6 x64 netfx SDK JPN has ProductVersion = 1.1.##### instead of 2.0.#####
When deployed thru Active Directory, the version number is displayed in the Group Policy Object - Software installation table. This can be confusing when the product name states "2.0" but the version data says "1.1".
To resolve this issue
There is no known resolution.
2.1.7 v1.1 VJ# redist does not install on a IA64 machine with v2.0 installed.
If a IA64 machine has v2.0 of the .NET Framework installed, the v1.1 VJ# setup will fail. Visual Studio 2003 has a prerequisite on VJ#, so this will also prevent VS2003 from installing on a IA64 machine with v2.0 of the framework installed.
To resolve this issue
There are two workarounds available.
The easiest is to first uninstall v2.0 of the framework, and then install v1.1 of VJ#.
If uninstalling v2.0 of the framework isn't possible, then the following steps can be taken....
Install v1.1 Redist
Manually extract v1.1 J#Redist MSI file
Edit the MSI file to remove 3 components (from FeatureComponents table) that are responsible for installing the given assemblies into the GAC
Run the MSI
Manually install the 3 assemblies into the GAC using 32bit (v1.1 or v2.0) gacutil.exe
Top of Page
3. Smart Device Programmability
3.1. Product Installation
3.1.1 Installing PB after Visual Studio will duplicate smart device platforms.
Currently, installing PB after Visual Studio 2005 will duplicate platform entries in datastore. When Visual Studio is invoked later or restarted, duplicate platform entries will be eliminated based on Platform ID without respect to how the entry was added. As a result, changes made to datastore (e.g., emulator settings) before PB was installed might be lost as part of duplicate entry removal.
To resolve this issue
Change the settings of the affected platforms manually through Visual Studio.
3.1.2 Installing and uninstalling PB on a computer with Visual Studio 2005 affects Visual Studio
Uninstalling PB unregisters conman2.dll and some other dlls on which Visual Studio depends. As a result, Visual Studio smart device functionality might be impaired.
To resolve this issue
Repair-installing Visual Studio fixes the problem.
Top of Page
4. Crystal Reports
For additional information concerning Crystal Reports for Visual Studio 2005, please visit us at: https://www.businessobjects.com/products/reporting/crystalreports/net/vsnet.asp
Top of Page