共用方式為


如何:建立發行集 (RMO 程式設計)

您可以使用「複寫管理物件」(RMO) 以程式設計的方式建立發行集。用來建立發行集的 RMO 類別,將取決於所建立的發行集類型而定。

安全性注意事項安全性注意事項

可能的話,會在執行階段提示使用者輸入安全性認證。如果您必須儲存認證,請使用 Microsoft Windows .NET Framework 提供的<密碼編譯服務>(英文)。

建立快照式或交易式發行集

  1. 使用 ServerConnection 類別建立與發行者的連接。

  2. 為發行集資料庫建立 ReplicationDatabase 類別的執行個體、將 ConnectionContext 屬性設定為步驟 1 中的 ServerConnection 執行個體,並呼叫 LoadProperties 方法。如果 LoadProperties 傳回 false,請確認此資料庫確實存在。

  3. 如果 EnabledTransPublishing 屬性為 false,請將它設定為 true。

  4. 如果是交易式發行集,請檢查 LogReaderAgentExists 屬性的值。如果這個屬性為 true,則表示記錄讀取器代理程式作業已存在此資料庫中。如果這個屬性為 false,請執行下列動作:

  5. 建立 TransPublication 類別的執行個體,並為此物件設定下列屬性:

  6. 呼叫 Create 方法來建立發行集。

    安全性注意事項安全性注意事項

     當利用遠端散發者來設定發行者時,提供給所有屬性的值 (包括 SnapshotGenerationAgentProcessSecurity) 都會以純文字的方式傳給散發者。您應該先加密發行者及其遠端散發者之間的連接,再呼叫 Create 方法。如需詳細資訊,請參閱<加密 SQL Server 的連接>。

  7. 呼叫 CreateSnapshotAgent 方法來為發行集建立快照集代理程式作業。

建立合併式發行集

  1. 使用 ServerConnection 類別建立與發行者的連接。

  2. 為發行集資料庫建立 ReplicationDatabase 類別的執行個體、將 ConnectionContext 屬性設定為步驟 1 中的 ServerConnection 執行個體,並呼叫 LoadProperties 方法。如果 LoadProperties 傳回 false,請確認此資料庫確實存在。

  3. 如果 EnabledMergePublishing 屬性為 false,請將它設定為 true 然後呼叫 CommitPropertyChanges

  4. 建立 MergePublication 類別的執行個體,並為此物件設定下列屬性:

  5. 呼叫 Create 方法來建立發行集。

    安全性注意事項安全性注意事項

     當利用遠端散發者來設定發行者時,提供給所有屬性的值 (包括 SnapshotGenerationAgentProcessSecurity) 都會以純文字的方式傳給散發者。您應該先加密發行者及其遠端散發者之間的連接,再呼叫 Create 方法。如需詳細資訊,請參閱<加密 SQL Server 的連接>。

  6. 呼叫 CreateSnapshotAgent 方法來為發行集建立快照集代理程式作業。

範例

此範例會針對交易式發行啟用 AdventureWorks 資料庫、定義記錄讀取器代理程式作業,並建立 AdvWorksProductTran 發行集。必須為此發行集定義發行項。建立記錄讀取器代理程式作業和快照集代理程式作業所需的 Windows 帳戶認證是在執行階段所傳遞。若要了解如何使用 RMO 來定義快照發行項和交易式發行項,請參閱<如何:定義發行項 (RMO 程式設計)>。

         // Set the Publisher, publication database, and publication names.
            string publicationName = "AdvWorksProductTran";
            string publicationDbName = "AdventureWorks2008R2";
            string publisherName = publisherInstance;

            ReplicationDatabase publicationDb;
            TransPublication publication;

            // Create a connection to the Publisher using Windows Authentication.
            ServerConnection conn;
            conn = new ServerConnection(publisherName);


            try
            {
                // Connect to the Publisher.
                conn.Connect();

                // Enable the AdventureWorks database for transactional publishing.
                publicationDb = new ReplicationDatabase(publicationDbName, conn);

                // If the database exists and is not already enabled, 
                // enable it for transactional publishing.
                if (publicationDb.LoadProperties())
                {
                    if (!publicationDb.EnabledTransPublishing)
                    {
                        publicationDb.EnabledTransPublishing = true;
                    }

                    // If the Log Reader Agent does not exist, create it.
                    if (!publicationDb.LogReaderAgentExists)
                    {
                        // Specify the Windows account under which the agent job runs.
                        // This account will be used for the local connection to the 
                        // Distributor and all agent connections that use Windows Authentication.
                        publicationDb.LogReaderAgentProcessSecurity.Login = winLogin;
                        publicationDb.LogReaderAgentProcessSecurity.Password = winPassword;

                        // Explicitly set authentication mode for the Publisher connection
                        // to the default value of Windows Authentication.
                        publicationDb.LogReaderAgentPublisherSecurity.WindowsAuthentication = true;

                        // Create the Log Reader Agent job.
                        publicationDb.CreateLogReaderAgent();
                    }
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The {0} database does not exist at {1}.",
                        publicationDb, publisherName));
                }

                // Set the required properties for the transactional publication.
                publication = new TransPublication();
                publication.ConnectionContext = conn;
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;

                // Specify a transactional publication (the default).
                publication.Type = PublicationType.Transactional;

                // Activate the publication so that we can add subscriptions.
                publication.Status = State.Active;

                // Enable push and pull subscriptions and independent Distribition Agents.
                publication.Attributes |= PublicationAttributes.AllowPull;
                publication.Attributes |= PublicationAttributes.AllowPush;
                publication.Attributes |= PublicationAttributes.IndependentAgent;

                // Specify the Windows account under which the Snapshot Agent job runs.
                // This account will be used for the local connection to the 
                // Distributor and all agent connections that use Windows Authentication.
                publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin;
                publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword;

                // Explicitly set the security mode for the Publisher connection
                // Windows Authentication (the default).
                publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = true;

                if (!publication.IsExistingObject)
                {
                    // Create the transactional publication.
                    publication.Create();

                    // Create a Snapshot Agent job for the publication.
                    publication.CreateSnapshotAgent();
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The {0} publication already exists.", publicationName));
                }
            }

            catch (Exception ex)
            {
                // Implement custom application error handling here.
                throw new ApplicationException(String.Format(
                    "The publication {0} could not be created.", publicationName), ex);
            }
            finally
            {
                conn.Disconnect();
            }
' Set the Publisher, publication database, and publication names.
Dim publicationName As String = "AdvWorksProductTran"
Dim publicationDbName As String = "AdventureWorks2008R2"
Dim publisherName As String = publisherInstance

Dim publicationDb As ReplicationDatabase
Dim publication As TransPublication

' Create a connection to the Publisher using Windows Authentication.
Dim conn As ServerConnection
conn = New ServerConnection(publisherName)

Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Enable the AdventureWorks database for transactional publishing.
    publicationDb = New ReplicationDatabase(publicationDbName, conn)

    ' If the database exists and is not already enabled, 
    ' enable it for transactional publishing.
    If publicationDb.LoadProperties() Then
        If Not publicationDb.EnabledTransPublishing Then
            publicationDb.EnabledTransPublishing = True
        End If

        ' If the Log Reader Agent does not exist, create it.
        If Not publicationDb.LogReaderAgentExists Then
            ' Specify the Windows account under which the agent job runs.
            ' This account will be used for the local connection to the 
            ' Distributor and all agent connections that use Windows Authentication.
            publicationDb.LogReaderAgentProcessSecurity.Login = winLogin
            publicationDb.LogReaderAgentProcessSecurity.Password = winPassword

            ' Explicitly set authentication mode for the Publisher connection
            ' to the default value of Windows Authentication.
            publicationDb.LogReaderAgentPublisherSecurity.WindowsAuthentication = True

            ' Create the Log Reader Agent job.
            publicationDb.CreateLogReaderAgent()
        End If
    Else
        Throw New ApplicationException(String.Format( _
         "The {0} database does not exist at {1}.", _
         publicationDb, publisherName))
    End If

    ' Set the required properties for the transactional publication.
    publication = New TransPublication()
    publication.ConnectionContext = conn
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName

    ' Specify a transactional publication (the default).
    publication.Type = PublicationType.Transactional

    'Enable push and pull subscriptions and independent Distribition Agents.
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.AllowPull
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.AllowPush
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.IndependentAgent

    ' Activate the publication so that we can add subscriptions.
    publication.Status = State.Active

    ' Specify the Windows account under which the Snapshot Agent job runs.
    ' This account will be used for the local connection to the 
    ' Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword

    ' Explicitly set the security mode for the Publisher connection
    ' Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = True

    If Not publication.IsExistingObject Then
        ' Create the transactional publication.
        publication.Create()

        ' Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent()
    Else
        Throw New ApplicationException(String.Format( _
            "The {0} publication already exists.", publicationName))
    End If
Catch ex As Exception
    ' Implement custom application error handling here.
    Throw New ApplicationException(String.Format( _
        "The publication {0} could not be created.", publicationName), ex)
Finally
    conn.Disconnect()
End Try

此範例會針對合併發行啟用 AdventureWorks 資料庫,並建立 AdvWorksSalesOrdersMerge 發行集。仍然必須為此發行集定義發行項。建立快照集代理程式作業所需的 Windows 帳戶認證是在執行階段所傳遞。若要了解如何使用 RMO 來定義合併發行項,請參閱<如何:定義發行項 (RMO 程式設計)>。

           // Set the Publisher, publication database, and publication names.
            string publisherName = publisherInstance;
            string publicationName = "AdvWorksSalesOrdersMerge";
            string publicationDbName = "AdventureWorks2008R2";

            ReplicationDatabase publicationDb;
            MergePublication publication;

            // Create a connection to the Publisher.
            ServerConnection conn = new ServerConnection(publisherName);

            try
            {
                // Connect to the Publisher.
                conn.Connect();

                // Enable the database for merge publication.               
                publicationDb = new ReplicationDatabase(publicationDbName, conn);
                if (publicationDb.LoadProperties())
                {
                    if (!publicationDb.EnabledMergePublishing)
                    {
                        publicationDb.EnabledMergePublishing = true;
                    }
                }
                else
                {
                    // Do something here if the database does not exist. 
                    throw new ApplicationException(String.Format(
                        "The {0} database does not exist on {1}.",
                        publicationDb, publisherName));
                }

                // Set the required properties for the merge publication.
                publication = new MergePublication();
                publication.ConnectionContext = conn;
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;

                // Enable precomputed partitions.
                publication.PartitionGroupsOption = PartitionGroupsOption.True;

                // Specify the Windows account under which the Snapshot Agent job runs.
                // This account will be used for the local connection to the 
                // Distributor and all agent connections that use Windows Authentication.
                publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin;
                publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword;

                // Explicitly set the security mode for the Publisher connection
                // Windows Authentication (the default).
                publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = true;

                // Enable Subscribers to request snapshot generation and filtering.
                publication.Attributes |= PublicationAttributes.AllowSubscriberInitiatedSnapshot;
                publication.Attributes |= PublicationAttributes.DynamicFilters;

                // Enable pull and push subscriptions.
                publication.Attributes |= PublicationAttributes.AllowPull;
                publication.Attributes |= PublicationAttributes.AllowPush;

                if (!publication.IsExistingObject)
                {
                    // Create the merge publication.
                    publication.Create();
                    
                    // Create a Snapshot Agent job for the publication.
                    publication.CreateSnapshotAgent();
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The {0} publication already exists.", publicationName));
                }
            }

            catch (Exception ex)
            {
                // Implement custom application error handling here.
                throw new ApplicationException(String.Format(
                    "The publication {0} could not be created.", publicationName), ex);
            }
            finally
            {
                conn.Disconnect();
            }
' Set the Publisher, publication database, and publication names.
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publicationDbName As String = "AdventureWorks2008R2"

Dim publicationDb As ReplicationDatabase
Dim publication As MergePublication

' Create a connection to the Publisher.
Dim conn As ServerConnection = New ServerConnection(publisherName)

Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Enable the database for merge publication.                
    publicationDb = New ReplicationDatabase(publicationDbName, conn)
    If publicationDb.LoadProperties() Then
        If Not publicationDb.EnabledMergePublishing Then
            publicationDb.EnabledMergePublishing = True
        End If
    Else
        ' Do something here if the database does not exist. 
        Throw New ApplicationException(String.Format( _
         "The {0} database does not exist on {1}.", _
         publicationDb, publisherName))
    End If

    ' Set the required properties for the merge publication.
    publication = New MergePublication()
    publication.ConnectionContext = conn
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName

    ' Enable precomputed partitions.
    publication.PartitionGroupsOption = PartitionGroupsOption.True

    ' Specify the Windows account under which the Snapshot Agent job runs.
    ' This account will be used for the local connection to the 
    ' Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword

    ' Explicitly set the security mode for the Publisher connection
    ' Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = True

    ' Enable Subscribers to request snapshot generation and filtering.
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowSubscriberInitiatedSnapshot
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.DynamicFilters

    ' Enable pull and push subscriptions
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowPull
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowPush

    If Not publication.IsExistingObject Then
        ' Create the merge publication.
        publication.Create()

        ' Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent()
    Else
        Throw New ApplicationException(String.Format( _
            "The {0} publication already exists.", publicationName))
    End If
Catch ex As Exception
    ' Implement custom application error handling here.
    Throw New ApplicationException(String.Format( _
        "The publication {0} could not be created.", publicationName), ex)
Finally
    conn.Disconnect()
End Try