Share via


How to Configure Static Routes

For the latest version of Commerce Server 2007 Help, see the Microsoft Web site.

Follow these steps on each Web server to configure static routes for the private network adapters.

To configure static routes on Windows Server 2003

  1. On the desktop, right-click My Network Places, and then click Properties.

  2. In the Network and Dial-up Properties window, right-click <adapter name>, and then click Properties.

  3. In the <adapter name> Properties dialog box, in the Components checked are used by this connection section, click Internet Protocol (TCP/IP), and then click Properties.

  4. In the Internet Protocol (TCP/IP) Properties dialog box, click Advanced.

  5. In the Advanced TCP/IP Settings dialog box, on the IP Settings tab, in the Default gateways section, click Add.

  6. In the TCP/IP Gateway Address dialog box, in the Gateway box, type the IP address of the default gateway or router interface, and then click Add.

  7. Repeat steps 5 and 6 for each additional router interface (if applicable).

  8. In the Advanced TCP/IP Settings dialog box, click OK.

  9. In the Internet Protocol (TCP/IP) Properties dialog box, click OK.

  10. In the <adapter name> Properties dialog box, click OK.

  11. Restart the server.

To configure static routes on Windows Server 2008

  1. On the desktop, right-click Network, and then click Properties.

  2. In the Network and Sharing Center window, click Manage network connections.

  3. Right-click <adapter name>, and then click Properties.

  4. In the <adapter name> Properties dialog box, in the This connection uses the following items section, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), as required, and then click Properties.

  5. In the Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) dialog box, click Advanced.

  6. In the Advanced TCP/IP Settings dialog box, on the IP Settings tab, in the Default gateways section, click Add.

  7. In the TCP/IP Gateway Address dialog box, in the TCP/IP Gateway Address box, type the IP address of the default gateway or router interface, and then click Add.

  8. Repeat steps 6 and 7 for each additional router interface (if applicable).

  9. In the Advanced TCP/IP Settings dialog box, click OK.

  10. In the Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6)Properties dialog box, click OK.

  11. In the <adapter name> Properties dialog box, click OK.

  12. Restart the server.

See Also

Other Resources

Building the Web Tier

Building an Enterprise Deployment

Deployment

Configuring the Web Servers