Share via


DHCPv6 Non-Configurable Registry Settings (Windows CE 5.0)

Send Feedback

The following values are created and used internally by DHCPv6. They should never be modified using the Registry Editor. They are listed here for reference only. These entries are located under the HKEY_LOCAL_MACHINE\Comm\<Adapter Name>\Parms\Tcpip subkey.

Note   The default registry values vary depending on which Catalog items you include in your OS design. For more information, see Default Registry Settings.

The following table shows the non-configurable values for the HKEY_LOCAL_MACHINE\Comm\<Adapter Name>\Parms\Tcpip subkey.

Value : type Description
DhcpV6DNS : REG_MULTI_SZ This value stores the IPv6 address of the DNS name server.
DhcpV6DomainList : REG_MULTI_SZ This value contains the adapter-specific DNS domain name that is configured by the DHCP Server.
PrefixAddress : REG_MULTI_SZ This value specifies the DHCPv6 configured prefix. This value can be any valid prefix. Its length is specified in PrefixLength.
PrefixLeaseObtainedHigh : REG_DWORD This value is used by DHCPv6 client service to store the time (high) at which the lease on the IPv6 address for this adapter was obtained. The valid range for this value is 1–0xFFFFFFFF (hexadecimal).
PrefixLeaseObtainedLow : REG_DWORD This value is used by DHCPv6 client service to store the time (low) at which the lease on the IPv6 address for this adapter was obtained. The valid range for this value is 1–0xFFFFFFFF (hexadecimal).
PrefixLength : REG_DWORD This value is the length of the prefix, in bits.
PrefixPreferredLifetime : REG_DWORD This value is the preferred lifetime of the DHCPv6 obtained prefix. This value is based on the number of seconds since the lease was obtained.
PrefixT1 : REG_DWORD This value is used by DHCP client service to store the time at which the service will first try to renew the lease on the IPv6 prefix for the adapter by contacting the server that granted the lease. The PrefixT1 time is based on the number of seconds since the lease was obtained.
PrefixT2 : REG_DWORD This value is used by DHCPv6 client service to store the time at which the service will try to rebind the lease on the IPv6 prefix for the adapter. The PrefixT2 time is based on the number of seconds since the lease was obtained.
PrefixValidLifetime : REG_DWORD This value is the valid lifetime of the DHCPv6 obtained prefix. The PrefixValidLifetime is based on the number of seconds since the lease was obtained. The prefix is no longer valid after this time.

See Also

TCP/IPv6 Registry Settings | DHCPv6 Lite Registry Settings | TCP/IPv4 and v6 Common Registry Settings

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.