getnameinfo function (ws2tcpip.h)

The getnameinfo function provides protocol-independent name resolution from an address to an ANSI host name and from a port number to the ANSI service name.

Syntax

INT WSAAPI getnameinfo(
  [in]  const SOCKADDR *pSockaddr,
  [in]  socklen_t      SockaddrLength,
  [out] PCHAR          pNodeBuffer,
  [in]  DWORD          NodeBufferSize,
  [out] PCHAR          pServiceBuffer,
  [in]  DWORD          ServiceBufferSize,
  [in]  INT            Flags
);

Parameters

[in] pSockaddr

A pointer to a socket address structure that contains the address and port number of the socket. For IPv4, the sa parameter points to a sockaddr_in structure. For IPv6, the sa parameter points to a sockaddr_in6 structure.

[in] SockaddrLength

The length, in bytes, of the structure pointed to by the sa parameter.

[out] pNodeBuffer

A pointer to an ANSI string used to hold the host name. On success, the host name is returned as a Fully Qualified Domain Name (FQDN) by default. If the host parameter is NULL, this indicates the caller does not want to receive a host name string.

[in] NodeBufferSize

The length, in bytes, of the buffer pointed to by the host parameter. The caller must provide a buffer large enough to hold the host name, including the terminating NULL character.

[out] pServiceBuffer

A pointer to an ANSI string to hold the service name. On success, an ANSI string that represents the service name associated with the port number is returned. If the serv parameter is NULL, this indicates the caller does not want to receive a service name string.

[in] ServiceBufferSize

The length, in bytes, of the buffer pointed to by the serv parameter. The caller must provide a buffer large enough to hold the service name, including the terminating NULL character.

[in] Flags

A value used to customize processing of the getnameinfo function. See the Remarks section.

Return value

On success, getnameinfo returns zero. Any nonzero return value indicates failure and a specific error code can be retrieved by calling WSAGetLastError.

Nonzero error codes returned by the getnameinfo function also map to the set of errors outlined by Internet Engineering Task Force (IETF) recommendations. The following table lists these error codes and their WSA equivalents. It is recommended that the WSA error codes be used, as they offer familiar and comprehensive error information for Winsock programmers.

Error value WSA equivalent Description
EAI_AGAIN WSATRY_AGAIN A temporary failure in name resolution occurred.
EAI_BADFLAGS WSAEINVAL One or more invalid parameters was passed to the getnameinfo function. This error is returned if a host name was requested but the hostlen parameter was zero or if a service name was requested, but the servlen parameter was zero.
EAI_FAIL WSANO_RECOVERY A nonrecoverable failure in name resolution occurred.
EAI_FAMILY WSAEAFNOSUPPORT The sa_family member of socket address structure pointed to by the sa parameter is not supported.
EAI_MEMORY WSA_NOT_ENOUGH_MEMORY A memory allocation failure occurred.
EAI_NONAME WSAHOST_NOT_FOUND A service name was requested, but no port number was found in the structure pointed to by the sa parameter or no service name matching the port number was found. NI_NAMEREQD is set and the host name cannot be located, or both the host and serv parameters were NULL.
 

Use the gai_strerror function to print error messages based on the EAI codes returned by the getnameinfo function. The gai_strerror function is provided for compliance with IETF recommendations, but it is not thread safe. Therefore, use of traditional Windows Sockets functions such as WSAGetLastError is recommended.

In addition, the following error codes can be returned.

Error code Meaning
WSAEFAULT
This error is returned if the sa parameter is NULL or the salen parameter is less than the length required for the size of sockaddr_in structure for IPv4 or the sockaddr_in6 structure for IPv6.

Remarks

The getnameinfo function is the ANSI version of a function that provides protocol-independent name resolution. The getnameinfo function is used to translate the contents of a socket address structure to a node name and/or a service name.

For IPv6 and IPv4 protocols, Name resolution can be by the Domain Name System (DNS), a local hosts file, or by other naming mechanisms. This function can be used to determine the host name for an IPv4 or IPv6 address, a reverse DNS lookup, or determine the service name for a port number. The getnameinfo function can also be used to convert an IP address or a port number in a sockaddr structure to an ANSI string. This function can also be used to determine the IP address for a host name.

Another name that can be used for the getnameinfo function is GetNameInfoA. Macros in the Ws2tcpip.h header file define GetNameInfoA to getnameinfo.

The Unicode version of this function available on Windows XP with Service Pack 2 (SP2) and later is GetNameInfoW.

Macros in the Winsock header file define a mixed-case function name of GetNameInfo that can be used when the application is targeted for Windows XP with SP2 and later (_WIN32_WINNT >= 0x0502). This GetNameInfo function should be called with the host and serv parameters of a pointer of type TCHAR. When UNICODE or _UNICODE is not defined, GetNameInfo is defined to the ANSI version and getnameinfo is called with the host and serv parameters of a pointer of type char. When UNICODE or _UNICODE is defined, GetNameInfo is defined to the Unicode version and GetNameInfoW is called with the pNodeBuffer and pServiceBuffer parameters of a pointer of type PWCHAR.

To simplify determining buffer requirements for the host and serv parameters, the following values for maximum host name length and maximum service name are defined in the Ws2tcpip.h header file.

#define NI_MAXSERV    32
#define NI_MAXHOST  1025

The flags parameter can be used to customize processing of the getnameinfo function. The following flags are available:

  • NI_NOFQDN
  • NI_NUMERICHOST
  • NI_NAMEREQD
  • NI_NUMERICSERV
  • NI_DGRAM

When the NI_NAMEREQD flag is set, a host name that cannot be resolved by DNS results in an error.

Setting the NI_NOFQDN flag results in local hosts having only their Relative Distinguished Name (RDN) returned in the host parameter.

Setting the NI_NUMERICHOST flag returns the numeric form of the host name instead of its name. The numeric form of the host name is also returned if the host name cannot be resolved by DNS.

Setting the NI_NUMERICSERV flag returns the port number of the service instead of its name. Also, if a host name is not found for an IP address (127.0.0.2, for example), the hostname is returned as the IP address.

On Windows Vista and later, if NI_NUMERICSERV is not specified in the flags parameter and the port number contained in sockaddr structure pointed to by the sa parameter does not resolve to a well known service, the getnameinfo function returns the numeric form of the service address (the port number) as a numeric string. When NI_NUMERICSERV is specified, the port number is returned as a numeric string. This behavior is specified in section 6.2 of RFC 3493. For more information, see www.ietf.org/rfc3493.txt

On Windows Server 2003 and earlier, if NI_NUMERICSERV is not specified in the flags parameter, and the port number contained in the sockaddr structure pointed to by the sa parameter does not resolve to a well known service, the getnameinfo function fails. When NI_NUMERICSERV is specified, the port number is returned as a numeric string.

Setting the NI_DGRAM flag indicates that the service is a datagram service. This flag is necessary for the few services that provide different port numbers for UDP and TCP service.

Note  The ability to perform reverse DNS lookups using the getnameinfo function is convenient, but such lookups are considered inherently unreliable, and should be used only as a hint.
 
Note  The getnameinfo function cannot be used to resolve alias names.
 

Example Code

The following code example shows how to use the getnameinfo function.
#include <winsock2.h>
#include <ws2tcpip.h>
#include <stdio.h>

// link with ws2_32.lib
#pragma comment(lib, "Ws2_32.lib")

int __cdecl main(int argc, char **argv)
{

    //-----------------------------------------
    // Declare and initialize variables
    WSADATA wsaData = {0};
    int iResult = 0;

    DWORD dwRetval;

    struct sockaddr_in saGNI;
    char hostname[NI_MAXHOST];
    char servInfo[NI_MAXSERV];
    u_short port = 27015;

    // Validate the parameters
    if (argc != 2) {
        printf("usage: %s IPv4 address\n", argv[0]);
        printf("  to return hostname\n");
        printf("       %s 127.0.0.1\n", argv[0]);
        return 1;
    }
    // Initialize Winsock
    iResult = WSAStartup(MAKEWORD(2, 2), &wsaData);
    if (iResult != 0) {
        printf("WSAStartup failed: %d\n", iResult);
        return 1;
    }
    //-----------------------------------------
    // Set up sockaddr_in structure which is passed
    // to the getnameinfo function
    saGNI.sin_family = AF_INET;
    saGNI.sin_addr.s_addr = inet_addr(argv[1]);
    saGNI.sin_port = htons(port);

    //-----------------------------------------
    // Call getnameinfo
    dwRetval = getnameinfo((struct sockaddr *) &saGNI,
                           sizeof (struct sockaddr),
                           hostname,
                           NI_MAXHOST, servInfo, NI_MAXSERV, NI_NUMERICSERV);

    if (dwRetval != 0) {
        printf("getnameinfo failed with error # %ld\n", WSAGetLastError());
        return 1;
    } else {
        printf("getnameinfo returned hostname = %s\n", hostname);
        return 0;
    }
}

Support for getnameinfo on older versions of Windows

The getnameinfo function was added to the Ws2_32.dll on Windows XP and later. If you want to execute an application using this function on earlier versions of Windows (Windows 2000, Windows NT, and Windows Me/98/95), then you need to include the Ws2tcpip.h file and also include the Wspiapi.h file. When the Wspiapi.h include file is added, the getnameinfo function is defined to the WspiapiGetNameInfo inline function in the Wspiapi.h file. At runtime, the WspiapiGetNameInfo function is implemented in such a way that if the Ws2_32.dll or the Wship6.dll (the file containing getnameinfo in the IPv6 Technology Preview for Windows 2000) does not include getnameinfo, then a version of getnameinfo is implemented inline based on code in the Wspiapi.h header file. This inline code will be used on older Windows platforms that do not natively support the getnameinfo function.

The IPv6 protocol is supported on Windows 2000 when the IPv6 Technology Preview for Windows 2000 is installed. Otherwise getnameinfo support on versions of Windows earlier than Windows XP is limited to handling IPv4 name resolution.

The GetNameInfoW function is the Unicode version of getnameinfo. The GetNameInfoW function was added to the Ws2_32.dll in Windows XP with SP2. The GetNameInfoW function cannot be used on versions of Windows earlier than Windows XP with SP2.

Windows Phone 8: This function is supported for Windows Phone Store apps on Windows Phone 8 and later.

Windows 8.1 and Windows Server 2012 R2: This function is supported for Windows Store apps on Windows 8.1, Windows Server 2012 R2, and later.

Requirements

Requirement Value
Minimum supported client Windows 8.1, Windows Vista [desktop apps | UWP apps]
Minimum supported server Windows Server 2003 [desktop apps | UWP apps]
Target Platform Windows
Header ws2tcpip.h
Library Ws2_32.lib
DLL Ws2_32.dll

See also

GetNameInfoW

WSAGetLastError

Winsock Functions

Winsock Reference

gai_strerror

getaddrinfo

sockaddr