Command Line Parameters for the DVR Engine Functionality Tests
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
For more information about how to edit the command line for a test, see Editing the Command-Line for a Test.
The following table shows the optional command line parameters for the DVR Engine Functionality Tests.
| Command line parameter | Description |
|---|---|
-x test_case_ID |
Specifies which test case to run. |
/? |
Outputs the command line options. |
/SinkUserSource guid |
Required GUID for the tuner source filter, which provides the input MPEG2 stream. |
/SinkASyncSource |
Internally used option for simulating input MPEG2 video streams. |
/SinkFileSource |
Internally used option for simulating input MPEG2 video streams. |
/SinkRecordLocation path |
Path for adjusting the record location for the DVREngine. This defaults to \hard disk2\. Adjust this to point to your DVR file storage location. |
/SourceTestGraph |
Internally used option for testing the DVR engine. |
/RenderVBI |
Used to indicate whether the Vertical Blanking Interval data should be connected to the DVREngine input. This is used for parental control options. |
/SourceDecoder guid |
Required GUID for the MPEG2 decoder filter, which is used to decode the MPEG2 data for rendering. |
/SourceDVRFile file |
The name of a set of .dvr-dat and .dvr-idx files which contain a short DVR program for testing. You can acquire this by using your DVR application, or saving a DVR recording from one of the DVR BVT tests. |
/SourceVideoPath |
The path to the dvr file specified by the /SourceDVRFile. |