Prerequisites for the File System Performance Test
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
The following table shows the hardware requirement for the File System Performance Test.
| Requirement | Description |
|---|---|
Storage device |
A storage device that is supported by the FSD and storage device block driver; for example a PC Card, Compact Flash device, or hard disk. A Storage device is not required if the test is intended to measure the performance of the Object Store. |
The following table shows the software requirements for the File System Performance Test.
| Requirement | Description |
|---|---|
Tux.exe |
Tux Test Harness, required for executing the test. |
Kato.dll |
Kato logging engine, required for logging test data. |
Perflog.dll |
Logging library required by the test program. This library provides functionality for timing and logging the performance data generated by the test library. |
Fsperflog.dll |
Test library. |
Note
When you run the File System Performance Test, the CETK temporarily copies files to the root directory of the target device. Before running the test, verify that there is at least 0.5 megabytes (MB) of free space in the root directory of the target device. If there is not sufficient space in the root directory of the target device, the test cannot run.