Prerequisites for the IR Port Test (Winsock 2.0)
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
The following table shows the hardware requirement for the IR Port Test (Winsock 2.0).
| Requirement | Description |
|---|---|
Two installed IR devices |
You must install one IR device on a test server and another IR device on a test client. You should position the IR devices in close proximity to one another. You should point each IR device directly at the other IR device. |
You can run the IR Port Test (Winsock 2.0) using either IR or a TCP/IP network as a control channel. If you use a TCP/IP network, the client and server must be on the TCP/IP network and must be able to communicate with each other.
Note
You can run the IR Port Test (Winsock 2.0) without a server.
The following table shows the software requirements for the IR Port Test (Winsock 2.0).
| Requirements | Description |
|---|---|
Tux.exe |
Tux test harness, required for executing the test |
Kato.dll |
Kato logging engine, required for logging test data |
Irapi22.dll |
Library containing test cases |
The following table shows the software requirements for running the IR Port Test (Winsock 2.0) on the test server.
| Requirements | Description |
|---|---|
Kato.dll |
Kato logging engine, required for logging test data |
Irapisrv22.exe |
Library containing test cases |
To run the IR Port Test (Winsock 2.0), before you build your run-time image, you must include the Winsock 2.0 and IR catalog items in your OS design.