Share via


System Errors - Numerical Order

A version of this page is also available for

Windows Embedded CE 6.0 R3

4/8/2010

The following table shows possible system error values.

Code Description Name

0

The operation completed successfully.

ERROR_SUCCESS

1

Incorrect function.

ERROR_INVALID_FUNCTION

2

The system cannot find the file specified.

ERROR_FILE_NOT_FOUND

3

The system cannot find the path specified.

ERROR_PATH_NOT_FOUND

4

The system cannot open the file.

ERROR_TOO_MANY_OPEN_FILES

5

Access is denied.

ERROR_ACCESS_DENIED

6

The handle is invalid.

ERROR_INVALID_HANDLE

7

The storage control blocks were destroyed.

ERROR_ARENA_TRASHED

8

Not enough storage is available to process this command.

ERROR_NOT_ENOUGH_MEMORY

9

The storage control block address is invalid.

ERROR_INVALID_BLOCK

10

The environment is incorrect.

ERROR_BAD_ENVIRONMENT

11

An attempt was made to load a program with an incorrect format.

ERROR_BAD_FORMAT

12

The access code is invalid.

ERROR_INVALID_ACCESS

13

The data is invalid.

ERROR_INVALID_DATA

14

Not enough storage is available to complete this operation.

ERROR_OUTOFMEMORY

15

The system cannot find the drive specified.

ERROR_INVALID_DRIVE

16

The directory cannot be removed.

ERROR_CURRENT_DIRECTORY

17

The system cannot move the file to a different disk drive.

ERROR_NOT_SAME_DEVICE

18

There are no more files.

ERROR_NO_MORE_FILES

19

The media is write protected.

ERROR_WRITE_PROTECT

20

The system cannot find the specified device.

ERROR_BAD_UNIT

21

The device is not ready.

ERROR_NOT_READY

22

The device does not recognize the command.

ERROR_BAD_COMMAND

23

Data error (cyclic redundancy check).

ERROR_CRC

24

The program issued a command but the command length is incorrect.

ERROR_BAD_LENGTH

25

The drive cannot locate a specific area or track on the disk.

ERROR_SEEK

26

The specified disk or diskette cannot be accessed.

ERROR_NOT_DOS_DISK

27

The drive cannot find the sector requested.

ERROR_SECTOR_NOT_FOUND

28

The printer is out of paper.

ERROR_OUT_OF_PAPER

29

The system cannot write to the specified device.

ERROR_WRITE_FAULT

30

The system cannot read from the specified device.

ERROR_READ_FAULT

31

A device attached to the system is not functioning.

ERROR_GEN_FAILURE

32

The process cannot access the file because it is being used by another process.

ERROR_SHARING_VIOLATION

33

The process cannot access the file because another process has locked a portion of the file.

ERROR_LOCK_VIOLATION

34

The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.

ERROR_WRONG_DISK

36

Too many files opened for sharing.

ERROR_SHARING_BUFFER_EXCEEDED

38

Reached the end of the file.

ERROR_HANDLE_EOF

39

The disk is full.

ERROR_HANDLE_DISK_FULL

50

The network request is not supported.

ERROR_NOT_SUPPORTED

51

The remote computer is not available.

ERROR_REM_NOT_LIST

52

A duplicate name exists on the network.

ERROR_DUP_NAME

53

The network path was not found.

ERROR_BAD_NETPATH

54

The network is busy.

ERROR_NETWORK_BUSY

55

The specified network resource or device is no longer available.

ERROR_DEV_NOT_EXIST

56

The network BIOS command limit has been reached.

ERROR_TOO_MANY_CMDS

57

A network adapter hardware error occurred.

ERROR_ADAP_HDW_ERR

58

The specified server cannot perform the requested operation.

ERROR_BAD_NET_RESP

59

An unexpected network error occurred.

ERROR_UNEXP_NET_ERR

60

The remote adapter is not compatible.

ERROR_BAD_REM_ADAP

61

The printer queue is full.

ERROR_PRINTQ_FULL

62

Space to store the file waiting to be printed is not available on the server.

ERROR_NO_SPOOL_SPACE

63

Your file waiting to be printed was deleted.

ERROR_PRINT_CANCELLED

64

The specified network name is no longer available.

ERROR_NETNAME_DELETED

65

Network access is denied.

ERROR_NETWORK_ACCESS_DENIED

66

The network resource type is not correct.

ERROR_BAD_DEV_TYPE

67

The network name cannot be found.

ERROR_BAD_NET_NAME

68

The name limit for the local computer network adapter card was exceeded.

ERROR_TOO_MANY_NAMES

69

The network BIOS session limit was exceeded.

ERROR_TOO_MANY_SESS

70

The remote server has been paused or is in the process of being started.

ERROR_SHARING_PAUSED

71

No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.

ERROR_REQ_NOT_ACCEP

72

The specified printer or disk device has been paused.

ERROR_REDIR_PAUSED

80

The file exists.

ERROR_FILE_EXISTS

82

The directory or file cannot be created.

ERROR_CANNOT_MAKE

83

Fail on interrupt 24 handler.

ERROR_FAIL_I24

84

Storage to process this request is not available.

ERROR_OUT_OF_STRUCTURES

85

The local device name is already in use.

ERROR_ALREADY_ASSIGNED

86

The specified network password is not correct.

ERROR_INVALID_PASSWORD

87

The parameter is incorrect.

ERROR_INVALID_PARAMETER

88

A write fault occurred on the network.

ERROR_NET_WRITE_FAULT

89

The system cannot start another process at this time.

ERROR_NO_PROC_SLOTS

100

Cannot create another system semaphore.

ERROR_TOO_MANY_SEMAPHORES

101

The exclusive semaphore is owned by another process.

ERROR_EXCL_SEM_ALREADY_OWNED

102

The semaphore is set and cannot be closed.

ERROR_SEM_IS_SET

103

The semaphore cannot be set again.

ERROR_TOO_MANY_SEM_REQUESTS

104

Cannot request exclusive semaphores at interrupt time.

ERROR_INVALID_AT_INTERRUPT_TIME

105

The previous ownership of this semaphore has ended.

ERROR_SEM_OWNER_DIED

106

Insert the diskette for drive %1.

ERROR_SEM_USER_LIMIT

107

The program stopped because an alternate diskette was not inserted.

ERROR_DISK_CHANGE

108

The disk is in use or locked by another process.

ERROR_DRIVE_LOCKED

109

The pipe has been ended.

ERROR_BROKEN_PIPE

110

The system cannot open the device or file specified.

ERROR_OPEN_FAILED

111

The file name is too long.

ERROR_BUFFER_OVERFLOW

112

There is not enough space on the disk.

ERROR_DISK_FULL

113

No more internal file identifiers available.

ERROR_NO_MORE_SEARCH_HANDLES

114

The target internal file identifier is incorrect.

ERROR_INVALID_TARGET_HANDLE

117

The IOCTL call made by the application program is not correct.

ERROR_INVALID_CATEGORY

118

The verify-on-write switch parameter value is not correct.

ERROR_INVALID_VERIFY_SWITCH

119

The system does not support the command requested.

ERROR_BAD_DRIVER_LEVEL

120

This function is not valid on this platform.

ERROR_CALL_NOT_IMPLEMENTED

121

The semaphore time-out period has expired.

ERROR_SEM_TIMEOUT

122

The data area passed to a system call is too small.

ERROR_INSUFFICIENT_BUFFER

123

The file name, directory name, or volume label syntax is incorrect.

ERROR_INVALID_NAME

124

The system call level is not correct.

ERROR_INVALID_LEVEL

125

The disk has no volume label.

ERROR_NO_VOLUME_LABEL

126

The specified module could not be found.

ERROR_MOD_NOT_FOUND

127

The specified procedure could not be found.

ERROR_PROC_NOT_FOUND

128

There are no child processes to wait for.

ERROR_WAIT_NO_CHILDREN

129

The %1 application cannot be run in Windows NT mode.

ERROR_CHILD_NOT_COMPLETE

130

Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

ERROR_DIRECT_ACCESS_HANDLE

131

An attempt was made to move the file pointer before the beginning of the file.

ERROR_NEGATIVE_SEEK

132

The file pointer cannot be set on the specified device or file.

ERROR_SEEK_ON_DEVICE

133

A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.

ERROR_IS_JOIN_TARGET

134

An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.

ERROR_IS_JOINED

135

An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.

ERROR_IS_SUBSTED

136

The system tried to delete the JOIN of a drive that is not joined.

ERROR_NOT_JOINED

137

The system tried to delete the substitution of a drive that is not substituted.

ERROR_NOT_SUBSTED

138

The system tried to join a drive to a directory on a joined drive.

ERROR_JOIN_TO_JOIN

139

The system tried to substitute a drive to a directory on a substituted drive.

ERROR_SUBST_TO_SUBST

140

The system tried to join a drive to a directory on a substituted drive.

ERROR_JOIN_TO_SUBST

141

The system tried to SUBST a drive to a directory on a joined drive.

ERROR_SUBST_TO_JOIN

142

The system cannot perform a JOIN or SUBST at this time.

ERROR_BUSY_DRIVE

143

The system cannot join or substitute a drive to or for a directory on the same drive.

ERROR_SAME_DRIVE

144

The directory is not a subdirectory of the root directory.

ERROR_DIR_NOT_ROOT

145

The directory is not empty.

ERROR_DIR_NOT_EMPTY

146

The path specified is being used in a substitute.

ERROR_IS_SUBST_PATH

147

Not enough resources are available to process this command.

ERROR_IS_JOIN_PATH

148

The path specified cannot be used at this time.

ERROR_PATH_BUSY

149

An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.

ERROR_IS_SUBST_TARGET

150

System trace information was not specified in your Config.sys file, or tracing is disallowed.

ERROR_SYSTEM_TRACE

151

The number of specified semaphore events for DosMuxSemWait is not correct.

ERROR_INVALID_EVENT_COUNT

152

DosMuxSemWait did not execute; too many semaphores are already set.

ERROR_TOO_MANY_MUXWAITERS

153

The DosMuxSemWait list is not correct.

ERROR_INVALID_LIST_FORMAT

154

The volume label you entered exceeds the label character limit of the target file system.

ERROR_LABEL_TOO_LONG

155

Cannot create another thread.

ERROR_TOO_MANY_TCBS

156

The recipient process has refused the signal.

ERROR_SIGNAL_REFUSED

157

The segment is already discarded and cannot be locked.

ERROR_DISCARDED

158

The segment is already unlocked.

ERROR_NOT_LOCKED

159

The address for the thread identifier is not correct.

ERROR_BAD_THREADID_ADDR

160

The argument string passed to DosExecPgm is not correct.

ERROR_BAD_ARGUMENTS

161

The specified path is invalid.

ERROR_BAD_PATHNAME

162

A signal is already pending.

ERROR_SIGNAL_PENDING

164

No more threads can be created in the system.

ERROR_MAX_THRDS_REACHED

167

Unable to lock a region of a file.

ERROR_LOCK_FAILED

170

The requested resource is in use.

ERROR_BUSY

173

A lock request was not outstanding for the supplied cancel region.

ERROR_CANCEL_VIOLATION

174

The file system does not support atomic changes to the lock type.

ERROR_ATOMIC_LOCKS_NOT_SUPPORTED

180

The system detected a segment number that was not correct.

ERROR_INVALID_SEGMENT_NUMBER

182

The operating system cannot run %1.

ERROR_INVALID_ORDINAL

183

Cannot create a file when that file already exists.

ERROR_ALREADY_EXISTS

186

The flag passed is not correct.

ERROR_INVALID_FLAG_NUMBER

187

The specified system semaphore name was not found.

ERROR_SEM_NOT_FOUND

188

The operating system cannot run %1.

ERROR_INVALID_STARTING_CODESEG

189

The operating system cannot run %1.

ERROR_INVALID_STACKSEG

190

The operating system cannot run %1.

ERROR_INVALID_MODULETYPE

191

Cannot run %1 in Windows NT mode.

ERROR_INVALID_EXE_SIGNATURE

192

The operating system cannot run %1.

ERROR_EXE_MARKED_INVALID

193

Is not a valid application.

ERROR_BAD_EXE_FORMAT

194

The operating system cannot run %1.

ERROR_ITERATED_DATA_EXCEEDS_64k

195

The operating system cannot run %1.

ERROR_INVALID_MINALLOCSIZE

196

The operating system cannot run this application program.

ERROR_DYNLINK_FROM_INVALID_RING

197

The operating system is not presently configured to run this application.

ERROR_IOPL_NOT_ENABLED

198

The operating system cannot run %1.

ERROR_INVALID_SEGDPL

199

The operating system cannot run this application program.

ERROR_AUTODATASEG_EXCEEDS_64k

200

The code segment cannot be greater than or equal to 64 KB.

ERROR_RING2SEG_MUST_BE_MOVABLE

201

The operating system cannot run %1.

ERROR_RELOC_CHAIN_XEEDS_SEGLIM

202

The operating system cannot run %1.

ERROR_INFLOOP_IN_RELOC_CHAIN

203

The system could not find the environment option that was entered.

ERROR_ENVVAR_NOT_FOUND

205

No process in the command subtree has a signal handler.

ERROR_NO_SIGNAL_SENT

206

The file name or extension is too long.

ERROR_FILENAME_EXCED_RANGE

207

The ring 2 stack is in use.

ERROR_RING2_STACK_IN_USE

208

The global file name characters, "*" or "?," are entered incorrectly or too many global file name characters are specified.

ERROR_META_EXPANSION_TOO_LONG

209

The signal being posted is not correct.

ERROR_INVALID_SIGNAL_NUMBER

210

The signal handler cannot be set.

ERROR_THREAD_1_INACTIVE

212

The segment is locked and cannot be reallocated.

ERROR_LOCKED

214

Too many dynamic-link modules are attached to this program or dynamic-link module.

ERROR_TOO_MANY_MODULES

215

Cannot nest calls to the LoadModule function.

ERROR_NESTING_NOT_ALLOWED

216

The image file %1 is valid, but is for a machine type other than the current machine.

ERROR_EXE_MACHINE_TYPE_MISMATCH

230

The pipe state is invalid.

ERROR_BAD_PIPE

231

All pipe instances are busy.

ERROR_PIPE_BUSY

232

The pipe is being closed.

ERROR_NO_DATA

233

No process is on the other end of the pipe.

ERROR_PIPE_NOT_CONNECTED

234

More data is available.

ERROR_MORE_DATA

240

The session was canceled.

ERROR_VC_DISCONNECTED

254

The specified extended attribute name was invalid.

ERROR_INVALID_EA_NAME

255

The extended attributes are inconsistent.

ERROR_EA_LIST_INCONSISTENT

258

The wait operation timed out

WAIT_TIMEOUT

259

No more data is available.

ERROR_NO_MORE_ITEMS

266

The copy functions cannot be used.

ERROR_CANNOT_COPY

267

The directory name is invalid.

ERROR_DIRECTORY

275

The extended attributes did not fit in the buffer.

ERROR_EAS_DIDNT_FIT

276

The extended attribute file on the mounted file system is corrupt.

ERROR_EA_FILE_CORRUPT

277

The extended attribute table file is full.

ERROR_EA_TABLE_FULL

278

The specified extended attribute handle is invalid.

ERROR_INVALID_EA_HANDLE

282

The mounted file system does not support extended attributes.

ERROR_EAS_NOT_SUPPORTED

288

Attempt to release mutex not owned by caller.

ERROR_NOT_OWNER

298

Too many posts were made to a semaphore.

ERROR_TOO_MANY_POSTS

299

Only part of a ReadProcessMemory or WriteProcessMemory request was completed.

ERROR_PARTIAL_COPY

317

The system cannot find message text for message number 0x%1 in the message file for %2.

ERROR_MR_MID_NOT_FOUND

487

Attempt to access invalid address.

ERROR_INVALID_ADDRESS

534

Arithmetic result exceeded 32 bits.

ERROR_ARITHMETIC_OVERFLOW

535

There is a process on other end of the pipe.

ERROR_PIPE_CONNECTED

536

Waiting for a process to open the other end of the pipe.

ERROR_PIPE_LISTENING

994

Access to the extended attribute was denied.

ERROR_EA_ACCESS_DENIED

995

The I/O operation has been aborted because of either a thread exit or an application request.

ERROR_OPERATION_ABORTED

996

Overlapped I/O event is not in a signaled state.

ERROR_IO_INCOMPLETE

997

Overlapped I/O operation is in progress.

ERROR_IO_PENDING

998

Invalid access to memory location.

ERROR_NOACCESS

999

Error performing inpage operation.

ERROR_SWAPERROR

1001

Recursion too deep; the stack overflowed.

ERROR_STACK_OVERFLOW

1002

The window cannot act on the sent message.

ERROR_INVALID_MESSAGE

1003

Cannot complete this function.

ERROR_CAN_NOT_COMPLETE

1004

Invalid flags.

ERROR_INVALID_FLAGS

1005

The volume does not contain a recognized file system. Verify that all required file system drivers are loaded and that the volume is not corrupted.

ERROR_UNRECOGNIZED_VOLUME

1006

The volume for a file has been externally altered so that the opened file is no longer valid.

ERROR_FILE_INVALID

1007

The requested operation cannot be performed in full-screen mode.

ERROR_FULLSCREEN_MODE

1008

An attempt was made to reference a token that does not exist.

ERROR_NO_TOKEN

1009

The configuration registry database is corrupt.

ERROR_BADDB

1010

The configuration registry key is invalid.

ERROR_BADKEY

1011

The configuration registry key could not be opened.

ERROR_CANTOPEN

1012

The configuration registry key could not be read.

ERROR_CANTREAD

1013

The configuration registry key could not be written.

ERROR_CANTWRITE

1014

One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.

ERROR_REGISTRY_RECOVERED

1015

The registry is corrupted. The structure of one of the files that contains registry data is corrupted, or the system's image of the file in memory is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.

ERROR_REGISTRY_CORRUPT

1016

An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.

ERROR_REGISTRY_IO_FAILED

1017

The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.

ERROR_NOT_REGISTRY_FILE

1018

Illegal operation attempted on a registry key that has been marked for deletion.

ERROR_KEY_DELETED

1019

System could not allocate the required space in a registry log.

ERROR_NO_LOG_SPACE

1020

Cannot create a symbolic link in a registry key that already has subkeys or values.

ERROR_KEY_HAS_CHILDREN

1021

Cannot create a stable subkey under a volatile parent key.

ERROR_CHILD_MUST_BE_VOLATILE

1022

A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.

ERROR_NOTIFY_ENUM_DIR

1051

A stop control has been sent to a service that other running services are dependent on.

ERROR_DEPENDENT_SERVICES_RUNNING

1052

The requested control is not valid for this service.

ERROR_INVALID_SERVICE_CONTROL

1053

The service did not respond to the start or control request in a timely fashion.

ERROR_SERVICE_REQUEST_TIMEOUT

1054

A thread could not be created for the service.

ERROR_SERVICE_NO_THREAD

1055

The service database is locked.

ERROR_SERVICE_DATABASE_LOCKED

1056

An instance of the service is already running.

ERROR_SERVICE_ALREADY_RUNNING

1057

The account name is invalid or does not exist.

ERROR_INVALID_SERVICE_ACCOUNT

1058

The specified service is disabled and cannot be started.

ERROR_SERVICE_DISABLED

1059

Circular service dependency was specified.

ERROR_CIRCULAR_DEPENDENCY

1060

The specified service does not exist as an installed service.

ERROR_SERVICE_DOES_NOT_EXIST

1061

The service cannot accept control messages at this time.

ERROR_SERVICE_CANNOT_ACCEPT_CTRL

1062

The service has not been started.

ERROR_SERVICE_NOT_ACTIVE

1063

The service process could not connect to the service controller.

ERROR_FAILED_SERVICE_CONTROLLER_CONNECT

1064

An exception occurred in the service when handling the control request.

ERROR_EXCEPTION_IN_SERVICE

1065

The database specified does not exist.

ERROR_DATABASE_DOES_NOT_EXIST

1066

The service has returned a service-specific error code.

ERROR_SERVICE_SPECIFIC_ERROR

1067

The process terminated unexpectedly.

ERROR_PROCESS_ABORTED

1068

The dependency service or group failed to start.

ERROR_SERVICE_DEPENDENCY_FAIL

1069

The service did not start due to a logon failure.

ERROR_SERVICE_LOGON_FAILED

1070

After starting, the service stopped responding (hung) in a start-pending state.

ERROR_SERVICE_START_HANG

1071

The specified service database lock is invalid.

ERROR_INVALID_SERVICE_LOCK

1072

The specified service has been marked for deletion.

ERROR_SERVICE_MARKED_FOR_DELETE

1073

The specified service already exists.

ERROR_SERVICE_EXISTS

1074

The system is currently running with the last-known-good configuration.

ERROR_ALREADY_RUNNING_LKG

1075

The dependency service does not exist or has been marked for deletion.

ERROR_SERVICE_DEPENDENCY_DELETED

1076

The current boot has already been accepted for use as the last-known-good control set.

ERROR_BOOT_ALREADY_ACCEPTED

1077

No attempts to start the service have been made since the last boot.

ERROR_SERVICE_NEVER_STARTED

1078

The name is already in use as either a service name or a service display name.

ERROR_DUPLICATE_SERVICE_NAME

1079

The account specified for this service is different from the account specified for other services running in the same process.

ERROR_DIFFERENT_SERVICE_ACCOUNT

1100

The physical end of the tape has been reached.

ERROR_END_OF_MEDIA

1101

A tape access reached a filemark.

ERROR_FILEMARK_DETECTED

1102

The beginning of the tape or partition was encountered.

ERROR_BEGINNING_OF_MEDIA

1103

A tape access reached the end of a set of files.

ERROR_SETMARK_DETECTED

1104

No more data is on the tape.

ERROR_NO_DATA_DETECTED

1105

Tape could not be partitioned.

ERROR_PARTITION_FAILURE

1106

When accessing a new tape of a multivolume partition, the current block size is incorrect.

ERROR_INVALID_BLOCK_LENGTH

1107

Tape partition information could not be found when loading a tape.

ERROR_DEVICE_NOT_PARTITIONED

1108

Unable to lock the media eject mechanism.

ERROR_UNABLE_TO_LOCK_MEDIA

1109

Unable to unload the media.

ERROR_UNABLE_TO_UNLOAD_MEDIA

1110

The media in the drive may have changed.

ERROR_MEDIA_CHANGED

1111

The I/O bus was reset.

ERROR_BUS_RESET

1112

No media in drive.

ERROR_NO_MEDIA_IN_DRIVE

1113

No mapping for the Unicode character exists in the target multibyte code page.

ERROR_NO_UNICODE_TRANSLATION

1114

A dynamic link library (DLL) initialization routine failed.

ERROR_DLL_INIT_FAILED

1115

A system shutdown is in progress.

ERROR_SHUTDOWN_IN_PROGRESS

1116

Unable to abort the system shutdown because no shutdown was in progress.

ERROR_NO_SHUTDOWN_IN_PROGRESS

1117

The request could not be performed because of an I/O device error.

ERROR_IO_DEVICE

1118

No serial device was successfully initialized. The serial driver will unload.

ERROR_SERIAL_NO_DEVICE

1119

Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.

ERROR_IRQ_BUSY

1120

A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

ERROR_MORE_WRITES

1121

A serial I/O operation completed because the time-out period expired. In other words, the IOCTL_SERIAL_XOFF_COUNTER did not reach zero.

ERROR_COUNTER_TIMEOUT

1122

No identifier address mark was found on the floppy disk.

ERROR_FLOPPY_ID_MARK_NOT_FOUND

1123

Mismatch between the floppy disk sector identifier field and the floppy disk controller track address.

ERROR_FLOPPY_WRONG_CYLINDER

1124

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

ERROR_FLOPPY_UNKNOWN_ERROR

1125

The floppy disk controller returned inconsistent results in its registers.

ERROR_FLOPPY_BAD_REGISTERS

1126

While accessing the hard disk, a recalibrate operation failed, even after retries.

ERROR_DISK_RECALIBRATE_FAILED

1127

While accessing the hard disk, a disk operation failed even after retries.

ERROR_DISK_OPERATION_FAILED

1128

While accessing the hard disk, a disk controller reset was needed, but even that failed.

ERROR_DISK_RESET_FAILED

1129

Physical end of tape encountered.

ERROR_EOM_OVERFLOW

1130

Not enough server storage is available to process this command.

ERROR_NOT_ENOUGH_SERVER_MEMORY

1131

A potential deadlock condition has been detected.

ERROR_POSSIBLE_DEADLOCK

1132

The base address or the file offset specified does not have the proper alignment.

ERROR_MAPPED_ALIGNMENT

1140

An attempt to change the system power state was vetoed by another application or driver.

ERROR_SET_POWER_STATE_VETOED

1141

The basic input/output system (BIOS) failed an attempt to change the system power state.

ERROR_SET_POWER_STATE_FAILED

1142

An attempt was made to create more links on a file than the file system supports.

ERROR_TOO_MANY_LINKS

1150

The specified program requires a newer version of Windows.

ERROR_OLD_WIN_VERSION

1151

The specified program is not a Windows or MS-DOS program.

ERROR_APP_WRONG_OS

1152

Cannot start more than one instance of the specified program.

ERROR_SINGLE_INSTANCE_APP

1153

The specified program was written for an earlier version of Windows.

ERROR_RMODE_APP

1154

One of the library files needed to run this application is damaged.

ERROR_INVALID_DLL

1155

No application is associated with the specified file for this operation.

ERROR_NO_ASSOCIATION

1156

An error occurred in sending the command to the application.

ERROR_DDE_FAIL

1157

One of the library files needed to run this application cannot be found.

ERROR_DLL_NOT_FOUND

1200

The specified device name is invalid.

ERROR_BAD_DEVICE

1201

The device is not currently connected but it is a remembered connection.

ERROR_CONNECTION_UNAVAIL

1202

An attempt was made to remember a device that had previously been remembered.

ERROR_DEVICE_ALREADY_REMEMBERED

1203

No network provider accepted the given network path.

ERROR_NO_NET_OR_BAD_PATH

1204

The specified network provider name is invalid.

ERROR_BAD_PROVIDER

1205

Unable to open the network connection profile.

ERROR_CANNOT_OPEN_PROFILE

1206

The network connection profile is corrupt.

ERROR_BAD_PROFILE

1207

Cannot enumerate a noncontainer.

ERROR_NOT_CONTAINER

1208

An extended error has occurred.

ERROR_EXTENDED_ERROR

1209

The format of the specified group name is invalid.

ERROR_INVALID_GROUPNAME

1210

The format of the specified computer name is invalid.

ERROR_INVALID_COMPUTERNAME

1211

The format of the specified event name is invalid.

ERROR_INVALID_EVENTNAME

1212

The format of the specified domain name is invalid.

ERROR_INVALID_DOMAINNAME

1213

The format of the specified service name is invalid.

ERROR_INVALID_SERVICENAME

1214

The format of the specified network name is invalid.

ERROR_INVALID_NETNAME

1215

The format of the specified share name is invalid.

ERROR_INVALID_SHARENAME

1216

The format of the specified password is invalid.

ERROR_INVALID_PASSWORDNAME

1217

The format of the specified message name is invalid.

ERROR_INVALID_MESSAGENAME

1218

The format of the specified message destination is invalid.

ERROR_INVALID_MESSAGEDEST

1219

The credentials supplied conflict with an existing set of credentials.

ERROR_SESSION_CREDENTIAL_CONFLICT

1220

An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

ERROR_REMOTE_SESSION_LIMIT_EXCEEDED

1221

The workgroup or domain name is already in use by another computer on the network.

ERROR_DUP_DOMAINNAME

1222

The network is not present or not started.

ERROR_NO_NETWORK

1223

The operation was canceled by the user.

ERROR_CANCELLED

1224

The requested operation cannot be performed on a file with a user-mapped section open.

ERROR_USER_MAPPED_FILE

1225

The remote system refused the network connection.

ERROR_CONNECTION_REFUSED

1226

The network connection was gracefully closed.

ERROR_GRACEFUL_DISCONNECT

1227

The network transport endpoint already has an address associated with it.

ERROR_ADDRESS_ALREADY_ASSOCIATED

1228

An address has not yet been associated with the network endpoint.

ERROR_ADDRESS_NOT_ASSOCIATED

1229

An operation was attempted on a nonexistent network connection.

ERROR_CONNECTION_INVALID

1230

An invalid operation was attempted on an active network connection.

ERROR_CONNECTION_ACTIVE

1231

The remote network is not reachable by the transport.

ERROR_NETWORK_UNREACHABLE

1232

The remote system is not reachable by the transport.

ERROR_HOST_UNREACHABLE

1233

The remote system does not support the transport protocol.

ERROR_PROTOCOL_UNREACHABLE

1234

No service is operating at the destination network endpoint on the remote system.

ERROR_PORT_UNREACHABLE

1235

The request was aborted.

ERROR_REQUEST_ABORTED

1236

The network connection was aborted by the local system.

ERROR_CONNECTION_ABORTED

1237

The operation could not be completed. A retry should be performed.

ERROR_RETRY

1238

A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

ERROR_CONNECTION_COUNT_LIMIT

1239

Attempting to log in during an unauthorized time of day for this account.

ERROR_LOGIN_TIME_RESTRICTION

1240

The account is not authorized to log in from this station.

ERROR_LOGIN_WKSTA_RESTRICTION

1241

The network address could not be used for the operation requested.

ERROR_INCORRECT_ADDRESS

1242

The service is already registered.

ERROR_ALREADY_REGISTERED

1243

The specified service does not exist.

ERROR_SERVICE_NOT_FOUND

1244

The operation being requested was not performed because the user has not been authenticated.

ERROR_NOT_AUTHENTICATED

1245

The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.

ERROR_NOT_LOGGED_ON

1246

Caller to continue with work in progress.

ERROR_CONTINUE

1247

An attempt was made to perform an initialization operation when initialization has already been completed.

ERROR_ALREADY_INITIALIZED

1248

No more local devices.

ERROR_NO_MORE_DEVICES

1300

Not all privileges referenced are assigned to the caller.

ERROR_NOT_ALL_ASSIGNED

1301

Some mapping between account names and security IDs was not done.

ERROR_SOME_NOT_MAPPED

1302

No system quota limits are specifically set for this account.

ERROR_NO_QUOTAS_FOR_ACCOUNT

1303

No encryption key is available. A well-known encryption key was returned.

ERROR_LOCAL_USER_SESSION_KEY

1304

The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string.

ERROR_NULL_LM_PASSWORD

1305

The revision level is unknown.

ERROR_UNKNOWN_REVISION

1306

Indicates two revision levels are incompatible.

ERROR_REVISION_MISMATCH

1307

This security identifier may not be assigned as the owner of this object.

ERROR_INVALID_OWNER

1308

This security identifier may not be assigned as the primary group of an object.

ERROR_INVALID_PRIMARY_GROUP

1309

An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

ERROR_NO_IMPERSONATION_TOKEN

1310

The group cannot be disabled.

ERROR_CANT_DISABLE_MANDATORY

1311

There are currently no logon servers available to service the logon request.

ERROR_NO_LOGON_SERVERS

1312

A specified logon session does not exist. It may already have been terminated.

ERROR_NO_SUCH_LOGON_SESSION

1313

A specified privilege does not exist.

ERROR_NO_SUCH_PRIVILEGE

1314

A required privilege is not held by the client.

ERROR_PRIVILEGE_NOT_HELD

1315

The name provided is not a properly formed account name.

ERROR_INVALID_ACCOUNT_NAME

1316

The specified user already exists.

ERROR_USER_EXISTS

1317

The specified user does not exist.

ERROR_NO_SUCH_USER

1318

The specified group already exists.

ERROR_GROUP_EXISTS

1319

The specified group does not exist.

ERROR_NO_SUCH_GROUP

1320

Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.

ERROR_MEMBER_IN_GROUP

1321

The specified user account is not a member of the specified group account.

ERROR_MEMBER_NOT_IN_GROUP

1322

The last remaining administration account cannot be disabled or deleted.

ERROR_LAST_ADMIN

1323

Unable to update the password. The value provided as the current password is incorrect.

ERROR_WRONG_PASSWORD

1324

Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

ERROR_ILL_FORMED_PASSWORD

1325

Unable to update the password because a password update rule has been violated.

ERROR_PASSWORD_RESTRICTION

1326

Logon failure — unknown user name or bad password.

ERROR_LOGON_FAILURE

1327

Logon failure — user account restriction.

ERROR_ACCOUNT_RESTRICTION

1328

Logon failure — account logon time restriction violation.

ERROR_INVALID_LOGON_HOURS

1329

Logon failure — user not allowed to log on to this computer.

ERROR_INVALID_WORKSTATION

1330

Logon failure — the specified account password has expired.

ERROR_PASSWORD_EXPIRED

1331

Logon failure — account currently disabled.

ERROR_ACCOUNT_DISABLED

1332

No mapping between account names and security IDs was done.

ERROR_NONE_MAPPED

1333

Too many LUIDs were requested at one time.

ERROR_TOO_MANY_LUIDS_REQUESTED

1334

No more LUIDs are available.

ERROR_LUIDS_EXHAUSTED

1335

The subauthority part of a security identifier is invalid for this particular use.

ERROR_INVALID_SUB_AUTHORITY

1336

The access control list (ACL) structure is invalid.

ERROR_INVALID_ACL

1337

The security identifier structure is invalid.

ERROR_INVALID_SID

1338

The security descriptor structure is invalid.

ERROR_INVALID_SECURITY_DESCR

1340

The inherited access control list (ACL) or access control entry (ACE) could not be built.

ERROR_BAD_INHERITANCE_ACL

1341

The server is currently disabled.

ERROR_SERVER_DISABLED

1342

The server is currently enabled.

ERROR_SERVER_NOT_DISABLED

1343

The value provided was an invalid value for an identifier authority.

ERROR_INVALID_ID_AUTHORITY

1344

No more memory is available for security information updates.

ERROR_ALLOTTED_SPACE_EXCEEDED

1345

The specified attributes are invalid, or incompatible with the attributes for the group as a whole.

ERROR_INVALID_GROUP_ATTRIBUTES

1346

Either a required impersonation level was not provided, or the provided impersonation level is invalid.

ERROR_BAD_IMPERSONATION_LEVEL

1347

Cannot open an anonymous level security token.

ERROR_CANT_OPEN_ANONYMOUS

1348

The validation information class requested was invalid.

ERROR_BAD_VALIDATION_CLASS

1349

The type of the token is inappropriate for its attempted use.

ERROR_BAD_TOKEN_TYPE

1350

Unable to perform a security operation on an object that has no associated security.

ERROR_NO_SECURITY_ON_OBJECT

1351

Indicates that a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.

ERROR_CANT_ACCESS_DOMAIN_INFO

1352

The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

ERROR_INVALID_SERVER_STATE

1353

The domain was in the wrong state to perform the security operation.

ERROR_INVALID_DOMAIN_STATE

1354

This operation is only allowed for the Primary Domain Controller (PDC) of the domain.

ERROR_INVALID_DOMAIN_ROLE

1355

The specified domain did not exist.

ERROR_NO_SUCH_DOMAIN

1356

The specified domain already exists.

ERROR_DOMAIN_EXISTS

1357

An attempt was made to exceed the limit on the number of domains per server.

ERROR_DOMAIN_LIMIT_EXCEEDED

1358

Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

ERROR_INTERNAL_DB_CORRUPTION

1359

The security account database contains an internal inconsistency.

ERROR_INTERNAL_ERROR

1360

Generic access types were contained in an access mask that should already be mapped to nongeneric types.

ERROR_GENERIC_NOT_MAPPED

1361

A security descriptor is not in the right format (absolute or self-relative).

ERROR_BAD_DESCRIPTOR_FORMAT

1362

The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

ERROR_NOT_LOGON_PROCESS

1363

Cannot start a new logon session with an identifier that is already in use.

ERROR_LOGON_SESSION_EXISTS

1364

A specified authentication package is unknown.

ERROR_NO_SUCH_PACKAGE

1365

The logon session is not in a state that is consistent with the requested operation.

ERROR_BAD_LOGON_SESSION_STATE

1366

The logon session identifier is already in use.

ERROR_LOGON_SESSION_COLLISION

1367

A logon request contained an invalid logon type value.

ERROR_INVALID_LOGON_TYPE

1369

The transaction state of a registry subtree is incompatible with the requested operation.

ERROR_RXACT_INVALID_STATE

1370

An internal security database corruption has been encountered.

ERROR_RXACT_COMMIT_FAILURE

1371

Cannot perform this operation on built-in accounts.

ERROR_SPECIAL_ACCOUNT

1372

Cannot perform this operation on this built-in special group.

ERROR_SPECIAL_GROUP

1373

Cannot perform this operation on this built-in special user.

ERROR_SPECIAL_USER

1374

The user cannot be removed from a group because the group is currently the user's primary group.

ERROR_MEMBERS_PRIMARY_GROUP

1375

The token is already in use as a primary token.

ERROR_TOKEN_ALREADY_IN_USE

1376

The specified local group does not exist.

ERROR_NO_SUCH_ALIAS

1377

The specified account name is not a member of the local group.

ERROR_MEMBER_NOT_IN_ALIAS

1378

The specified account name is already a member of the local group.

ERROR_MEMBER_IN_ALIAS

1379

The specified local group already exists.

ERROR_ALIAS_EXISTS

1380

Logon failure — the user has not been granted the requested logon type at this computer.

ERROR_LOGON_NOT_GRANTED

1381

The maximum number of secrets that may be stored in a single system has been exceeded.

ERROR_TOO_MANY_SECRETS

1382

The length of a secret exceeds the maximum length allowed.

ERROR_SECRET_TOO_LONG

1383

The local security authority database contains an internal inconsistency.

ERROR_INTERNAL_DB_ERROR

1384

During a logon attempt, the user's security context accumulated too many security IDs.

ERROR_TOO_MANY_CONTEXT_IDS

1385

Logon failure — the user has not been granted the requested logon type at this computer.

ERROR_LOGON_TYPE_NOT_GRANTED

1386

A cross-encrypted password is necessary to change a user password.

ERROR_NT_CROSS_ENCRYPTION_REQUIRED

1387

A new member could not be added to a local group because the member does not exist.

ERROR_NO_SUCH_MEMBER

1388

A new member could not be added to a local group because the member has the wrong account type.

ERROR_INVALID_MEMBER

1389

Too many security IDs have been specified.

ERROR_TOO_MANY_SIDS

1390

A cross-encrypted password is necessary to change this user password.

ERROR_LM_CROSS_ENCRYPTION_REQUIRED

1391

Indicates an ACL contains no inheritable components.

ERROR_NO_INHERITANCE

1392

The file or directory is corrupted and non-readable.

ERROR_FILE_CORRUPT

1393

The disk structure is corrupted and non-readable.

ERROR_DISK_CORRUPT

1394

There is no user session key for the specified logon session.

ERROR_NO_USER_SESSION_KEY

1395

The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.

ERROR_LICENSE_QUOTA_EXCEEDED

1400

Invalid window handle.

ERROR_INVALID_WINDOW_HANDLE

1401

Invalid menu handle.

ERROR_INVALID_MENU_HANDLE

1402

Invalid cursor handle.

ERROR_INVALID_CURSOR_HANDLE

1403

Invalid accelerator table handle.

ERROR_INVALID_ACCEL_HANDLE

1404

Invalid hook handle.

ERROR_INVALID_HOOK_HANDLE

1405

Invalid handle to a multiple-window position structure.

ERROR_INVALID_DWP_HANDLE

1406

Cannot create a top-level child window.

ERROR_TLW_WITH_WSCHILD

1407

Cannot find window class.

ERROR_CANNOT_FIND_WND_CLASS

1408

Invalid window, it belongs to another thread.

ERROR_WINDOW_OF_OTHER_THREAD

1409

Hot key is already registered.

ERROR_HOTKEY_ALREADY_REGISTERED

1410

Class already exists.

ERROR_CLASS_ALREADY_EXISTS

1411

Class does not exist.

ERROR_CLASS_DOES_NOT_EXIST

1412

Class still has open windows.

ERROR_CLASS_HAS_WINDOWS

1413

Invalid index.

ERROR_INVALID_INDEX

1414

Invalid icon handle.

ERROR_INVALID_ICON_HANDLE

1415

Using private DIALOG window words.

ERROR_PRIVATE_DIALOG_INDEX

1416

The list box identifier was not found.

ERROR_LISTBOX_ID_NOT_FOUND

1417

No wildcards were found.

ERROR_NO_WILDCARD_CHARACTERS

1418

Thread does not have a clipboard open.

ERROR_CLIPBOARD_NOT_OPEN

1419

Hot key is not registered.

ERROR_HOTKEY_NOT_REGISTERED

1420

The window is not a valid dialog window.

ERROR_WINDOW_NOT_DIALOG

1421

Control identifier not found.

ERROR_CONTROL_ID_NOT_FOUND

1422

Invalid message for a combo box because it does not have an edit control.

ERROR_INVALID_COMBOBOX_MESSAGE

1423

The window is not a combo box.

ERROR_WINDOW_NOT_COMBOBOX

1424

Height must be less than 256.

ERROR_INVALID_EDIT_HEIGHT

1425

Invalid device context (DC) handle.

ERROR_DC_NOT_FOUND

1426

Invalid hook procedure type.

ERROR_INVALID_HOOK_FILTER

1427

Invalid hook procedure.

ERROR_INVALID_FILTER_PROC

1428

Cannot set nonlocal hook without a module handle.

ERROR_HOOK_NEEDS_HMOD

1429

This hook procedure can only be set globally.

ERROR_GLOBAL_ONLY_HOOK

1430

The journal hook procedure is already installed.

ERROR_JOURNAL_HOOK_SET

1431

The hook procedure is not installed.

ERROR_HOOK_NOT_INSTALLED

1432

Invalid message for single-selection list box.

ERROR_INVALID_LB_MESSAGE

1434

This list box does not support tab stops.

ERROR_LB_WITHOUT_TABSTOPS

1435

Cannot destroy object created by another thread.

ERROR_DESTROY_OBJECT_OF_OTHER_THREAD

1436

Child windows cannot have menus.

ERROR_CHILD_WINDOW_MENU

1437

The window does not have a system menu.

ERROR_NO_SYSTEM_MENU

1438

Invalid message box style.

ERROR_INVALID_MSGBOX_STYLE

1439

Invalid system-wide (SPI_*) parameter.

ERROR_INVALID_SPI_VALUE

1440

Screen already locked.

ERROR_SCREEN_ALREADY_LOCKED

1441

All handles to windows in a multiple-window position structure must have the same parent.

ERROR_HWNDS_HAVE_DIFF_PARENT

1442

The window is not a child window.

ERROR_NOT_CHILD_WINDOW

1443

Invalid GW_* command.

ERROR_INVALID_GW_COMMAND

1444

Invalid thread identifier.

ERROR_INVALID_THREAD_ID

1445

Cannot process a message from a window that is not a multiple-document interface (MDI) window.

ERROR_NON_MDICHILD_WINDOW

1446

Pop-up menu already active.

ERROR_POPUP_ALREADY_ACTIVE

1447

The window does not have scroll bars.

ERROR_NO_SCROLLBARS

1448

Scroll bar range cannot be greater than 0x7FFF.

ERROR_INVALID_SCROLLBAR_RANGE

1449

Cannot show or remove the window in the way specified.

ERROR_INVALID_SHOWWIN_COMMAND

1450

Insufficient system resources exist to complete the requested service.

ERROR_NO_SYSTEM_RESOURCES

1451

Insufficient system resources exist to complete the requested service.

ERROR_NONPAGED_SYSTEM_RESOURCES

1452

Insufficient system resources exist to complete the requested service.

ERROR_PAGED_SYSTEM_RESOURCES

1453

Insufficient quota to complete the requested service.

ERROR_WORKING_SET_QUOTA

1454

Insufficient quota to complete the requested service.

ERROR_PAGEFILE_QUOTA

1455

The paging file is too small for this operation to complete.

ERROR_COMMITMENT_LIMIT

1456

A menu item was not found.

ERROR_MENU_ITEM_NOT_FOUND

1457

Invalid keyboard layout handle.

ERROR_INVALID_KEYBOARD_HANDLE

1458

Hook type not allowed.

ERROR_HOOK_TYPE_NOT_ALLOWED

1459

This operation requires an interactive window station.

ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION

1460

This operation returned because the time-out period expired.

ERROR_TIMEOUT

1500

The event tracking file is corrupted.

ERROR_EVENTLOG_FILE_CORRUPT

1501

No event tracking file could be opened, so the event tracking service did not start.

ERROR_EVENTLOG_CANT_START

1502

The event tracking file is full.

ERROR_LOG_FILE_FULL

1503

The event tracking file has changed between read operations.

ERROR_EVENTLOG_FILE_CHANGED

1617

The device has been removed

ERROR_DEVICE_REMOVED

1700

The string binding is invalid.

RPC_S_INVALID_STRING_BINDING

1701

The binding handle is not the correct type.

RPC_S_WRONG_KIND_OF_BINDING

1702

The binding handle is invalid.

RPC_S_INVALID_BINDING

1703

The RPC protocol sequence is not supported.

RPC_S_PROTSEQ_NOT_SUPPORTED

1704

The RPC protocol sequence is invalid.

RPC_S_INVALID_RPC_PROTSEQ

1705

The string universal unique identifier (UUID) is invalid.

RPC_S_INVALID_STRING_UUID

1706

The endpoint format is invalid.

RPC_S_INVALID_ENDPOINT_FORMAT

1707

The network address is invalid.

RPC_S_INVALID_NET_ADDR

1708

No endpoint was found.

RPC_S_NO_ENDPOINT_FOUND

1709

The time-out value is invalid.

RPC_S_INVALID_TIMEOUT

1710

The object universal unique identifier (UUID) was not found.

RPC_S_OBJECT_NOT_FOUND

1711

The object universally unique identifier (UUID) has already been registered.

RPC_S_ALREADY_REGISTERED

1712

The type UUID has already been registered.

RPC_S_TYPE_ALREADY_REGISTERED

1713

The remote procedure call (RPC) server is already listening.

RPC_S_ALREADY_LISTENING

1714

No protocol sequences have been registered.

RPC_S_NO_PROTSEQS_REGISTERED

1715

The RPC server is not listening.

RPC_S_NOT_LISTENING

1716

The manager type is unknown.

RPC_S_UNKNOWN_MGR_TYPE

1717

The interface is unknown.

RPC_S_UNKNOWN_IF

1718

There are no bindings.

RPC_S_NO_BINDINGS

1719

There are no protocol sequences.

RPC_S_NO_PROTSEQS

1720

The endpoint cannot be created.

RPC_S_CANT_CREATE_ENDPOINT

1721

Not enough resources are available to complete this operation.

RPC_S_OUT_OF_RESOURCES

1722

The RPC server is unavailable.

RPC_S_SERVER_UNAVAILABLE

1723

The RPC server is too busy to complete this operation.

RPC_S_SERVER_TOO_BUSY

1724

The network options are invalid.

RPC_S_INVALID_NETWORK_OPTIONS

1725

There is not a remote procedure call active in this thread.

RPC_S_NO_CALL_ACTIVE

1726

The remote procedure call failed.

RPC_S_CALL_FAILED

1727

The remote procedure call failed and did not execute.

RPC_S_CALL_FAILED_DNE

1728

A remote procedure call (RPC) protocol error occurred.

RPC_S_PROTOCOL_ERROR

1730

The transfer syntax is not supported by the RPC server.

RPC_S_UNSUPPORTED_TRANS_SYN

1732

The universal unique identifier (UUID) type is not supported.

RPC_S_UNSUPPORTED_TYPE

1733

The tag is invalid.

RPC_S_INVALID_TAG

1734

The array bounds are invalid.

RPC_S_INVALID_BOUND

1735

The binding does not contain an entry name.

RPC_S_NO_ENTRY_NAME

1736

The name syntax is invalid.

RPC_S_INVALID_NAME_SYNTAX

1737

The name syntax is not supported.

RPC_S_UNSUPPORTED_NAME_SYNTAX

1739

No network address is available to use to construct a universal unique identifier (UUID).

RPC_S_UUID_NO_ADDRESS

1740

The endpoint is a duplicate.

RPC_S_DUPLICATE_ENDPOINT

1741

The authentication type is unknown.

RPC_S_UNKNOWN_AUTHN_TYPE

1742

The maximum number of calls is too small.

RPC_S_MAX_CALLS_TOO_SMALL

1743

The string is too long.

RPC_S_STRING_TOO_LONG

1744

The RPC protocol sequence was not found.

RPC_S_PROTSEQ_NOT_FOUND

1745

The procedure number is out of range.

RPC_S_PROCNUM_OUT_OF_RANGE

1746

The binding does not contain any authentication information.

RPC_S_BINDING_HAS_NO_AUTH

1747

The authentication service is unknown.

RPC_S_UNKNOWN_AUTHN_SERVICE

1748

The authentication level is unknown.

RPC_S_UNKNOWN_AUTHN_LEVEL

1749

The security context is invalid.

RPC_S_INVALID_AUTH_IDENTITY

1750

The authorization service is unknown.

RPC_S_UNKNOWN_AUTHZ_SERVICE

1751

The entry is invalid.

EPT_S_INVALID_ENTRY

1752

The server endpoint cannot perform the operation.

EPT_S_CANT_PERFORM_OP

1753

There are no more endpoints available from the endpoint mapper.

EPT_S_NOT_REGISTERED

1754

No interfaces have been exported.

RPC_S_NOTHING_TO_EXPORT

1755

The entry name is incomplete.

RPC_S_INCOMPLETE_NAME

1756

The version option is invalid.

RPC_S_INVALID_VERS_OPTION

1757

There are no more members.

RPC_S_NO_MORE_MEMBERS

1758

There is nothing to unexport.

RPC_S_NOT_ALL_OBJS_UNEXPORTED

1759

The interface was not found.

RPC_S_INTERFACE_NOT_FOUND

1760

The entry already exists.

RPC_S_ENTRY_ALREADY_EXISTS

1761

The entry is not found.

RPC_S_ENTRY_NOT_FOUND

1762

The name service is unavailable.

RPC_S_NAME_SERVICE_UNAVAILABLE

1763

The network address family is invalid.

RPC_S_INVALID_NAF_ID

1764

The requested operation is not supported.

RPC_S_CANNOT_SUPPORT

1765

No security context is available to allow impersonation.

RPC_S_NO_CONTEXT_AVAILABLE

1766

An internal error occurred in a remote procedure call (RPC).

RPC_S_INTERNAL_ERROR

1767

The RPC server attempted an integer division by zero.

RPC_S_ZERO_DIVIDE

1768

An addressing error occurred in the RPC server.

RPC_S_ADDRESS_ERROR

1769

A floating-point operation at the RPC server caused a division by zero.

RPC_S_FP_DIV_ZERO

1770

A floating-point underflow occurred at the RPC server.

RPC_S_FP_UNDERFLOW

1771

A floating-point overflow occurred at the RPC server.

RPC_S_FP_OVERFLOW

1772

The list of RPC servers available for the binding of auto handles has been exhausted.

RPC_X_NO_MORE_ENTRIES

1773

Unable to open the character translation table file.

RPC_X_SS_CHAR_TRANS_OPEN_FAIL

1774

The file containing the character translation table has fewer than 512 bytes.

RPC_X_SS_CHAR_TRANS_SHORT_FILE

1775

A null context handle was passed from the client to the host during a remote procedure call.

RPC_X_SS_IN_NULL_CONTEXT

1777

The context handle changed during a remote procedure call.

RPC_X_SS_CONTEXT_DAMAGED

1778

The binding handles passed to a remote procedure call do not match.

RPC_X_SS_HANDLES_MISMATCH

1779

The stub is unable to get the remote procedure call handle.

RPC_X_SS_CANNOT_GET_CALL_HANDLE

1780

A null reference pointer was passed to the stub.

RPC_X_NULL_REF_POINTER

1781

The enumeration value is out of range.

RPC_X_ENUM_VALUE_OUT_OF_RANGE

1782

The byte count is too small.

RPC_X_BYTE_COUNT_TOO_SMALL

1783

The stub received bad data.

RPC_X_BAD_STUB_DATA

1784

The supplied user buffer is not valid for the requested operation.

ERROR_INVALID_USER_BUFFER

1785

The disk media is not recognized. It may not be formatted.

ERROR_UNRECOGNIZED_MEDIA

1786

The workstation does not have a trust secret.

ERROR_NO_TRUST_LSA_SECRET

1787

The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.

ERROR_NO_TRUST_SAM_ACCOUNT

1788

The trust relationship between the primary domain and the trusted domain failed.

ERROR_TRUSTED_DOMAIN_FAILURE

1789

The trust relationship between this workstation and the primary domain failed.

ERROR_TRUSTED_RELATIONSHIP_FAILURE

1790

The network logon failed.

ERROR_TRUST_FAILURE

1791

A remote procedure call is already in progress for this thread.

RPC_S_CALL_IN_PROGRESS

1792

An attempt was made to logon, but the network logon service was not started.

ERROR_NETLOGON_NOT_STARTED

1793

The user's account has expired.

ERROR_ACCOUNT_EXPIRED

1794

The redirector is in use and cannot be unloaded.

ERROR_REDIRECTOR_HAS_OPEN_HANDLES

1795

The specified printer driver is already installed.

ERROR_PRINTER_DRIVER_ALREADY_INSTALLED

1796

The specified port is unknown.

ERROR_UNKNOWN_PORT

1797

The printer driver is unknown.

ERROR_UNKNOWN_PRINTER_DRIVER

1798

The print processor is unknown.

ERROR_UNKNOWN_PRINTPROCESSOR

1799

The specified separator file is invalid.

ERROR_INVALID_SEPARATOR_FILE

1800

The specified priority is invalid.

ERROR_INVALID_PRIORITY

1801

The printer name is invalid.

ERROR_INVALID_PRINTER_NAME

1802

The printer already exists.

ERROR_PRINTER_ALREADY_EXISTS

1803

The printer command is invalid.

ERROR_INVALID_PRINTER_COMMAND

1804

The specified data type is invalid.

ERROR_INVALID_DATATYPE

1805

The environment specified is invalid.

ERROR_INVALID_ENVIRONMENT

1806

There are no more bindings.

RPC_S_NO_MORE_BINDINGS

1807

The account used is an interdomain trust account. Use your global user account or local user account to access this server.

ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT

1808

The account used is a computer account. Use your global user account or local user account to access this server.

ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT

1809

The account used is a server trust account. Use your global user account or local user account to access this server.

ERROR_NOLOGON_SERVER_TRUST_ACCOUNT

1810

The name or security identifier (SID) of the domain specified is inconsistent with the trust information for that domain.

ERROR_DOMAIN_TRUST_INCONSISTENT

1811

The server is in use and cannot be unloaded.

ERROR_SERVER_HAS_OPEN_HANDLES

1812

The specified image file did not contain a resource section.

ERROR_RESOURCE_DATA_NOT_FOUND

1813

The specified resource type cannot be found in the image file.

ERROR_RESOURCE_TYPE_NOT_FOUND

1814

The specified resource name cannot be found in the image file.

ERROR_RESOURCE_NAME_NOT_FOUND

1815

The specified resource language identifier cannot be found in the image file.

ERROR_RESOURCE_LANG_NOT_FOUND

1816

Not enough quota is available to process this command.

ERROR_NOT_ENOUGH_QUOTA

1817

No interfaces have been registered.

RPC_S_NO_INTERFACES

1818

The server was altered while processing this call.

RPC_S_CALL_CANCELLED

1819

The binding handle does not contain all required information.

RPC_S_BINDING_INCOMPLETE

1820

Communications failure.

RPC_S_COMM_FAILURE

1821

The requested authentication level is not supported.

RPC_S_UNSUPPORTED_AUTHN_LEVEL

1822

No principal name registered.

RPC_S_NO_PRINC_NAME

1823

The error specified is not a valid Windows NT RPC error value.

RPC_S_NOT_RPC_ERROR

1824

A UUID that is valid only on this computer has been allocated.

RPC_S_UUID_LOCAL_ONLY

1825

A security package specific error occurred.

RPC_S_SEC_PKG_ERROR

1826

Thread is not canceled.

RPC_S_NOT_CANCELLED

1827

Invalid operation on the encoding/decoding handle.

RPC_X_INVALID_ES_ACTION

1828

Incompatible version of the serializing package.

RPC_X_WRONG_ES_VERSION

1829

Incompatible version of the RPC stub.

RPC_X_WRONG_STUB_VERSION

1830

The idl pipe object is invalid or corrupted.

RPC_X_INVALID_PIPE_OBJECT

1831

The operation is invalid for a given idl pipe object.

RPC_X_INVALID_PIPE_OPERATION

1832

The Interface Definition Language (IDL) pipe version is not supported.

RPC_X_WRONG_PIPE_VERSION

1898

The group member was not found.

RPC_S_GROUP_MEMBER_NOT_FOUND

1899

The endpoint mapper database could not be created.

EPT_S_CANT_CREATE

1900

The object UUID is the nil UUID.

RPC_S_INVALID_OBJECT

1901

The specified time is invalid.

ERROR_INVALID_TIME

1902

The specified form name is invalid.

ERROR_INVALID_FORM_NAME

1903

The specified form size is invalid.

ERROR_INVALID_FORM_SIZE

1904

The specified printer handle is already being waited on

ERROR_ALREADY_WAITING

1905

The specified printer has been deleted.

ERROR_PRINTER_DELETED

1906

The state of the printer is invalid.

ERROR_INVALID_PRINTER_STATE

1907

The user must change his password before he logs on the first time.

ERROR_PASSWORD_MUST_CHANGE

1908

Could not find the domain controller for this domain.

ERROR_DOMAIN_CONTROLLER_NOT_FOUND

1909

The referenced account is currently locked out and may not be logged on to.

ERROR_ACCOUNT_LOCKED_OUT

1910

The object exporter specified was not found.

OR_INVALID_OXID

1911

The object specified was not found.

OR_INVALID_OID

1912

The object resolver set specified was not found.

OR_INVALID_SET

1913

Some data remains to be sent in the request buffer.

RPC_S_SEND_INCOMPLETE

2000

The pixel format is invalid.

ERROR_INVALID_PIXEL_FORMAT

2001

The specified driver is invalid.

ERROR_BAD_DRIVER

2002

The window style or class attribute is invalid for this operation.

ERROR_INVALID_WINDOW_STYLE

2003

The requested metafile operation is not supported.

ERROR_METAFILE_NOT_SUPPORTED

2004

The requested transformation operation is not supported.

ERROR_TRANSFORM_NOT_SUPPORTED

2005

The requested clipping operation is not supported.

ERROR_CLIPPING_NOT_SUPPORTED

2202

The specified user name is invalid.

ERROR_BAD_USERNAME

2250

This network connection does not exist.

ERROR_NOT_CONNECTED

2401

This network connection has files open or requests pending.

ERROR_OPEN_FILES

2402

Active connections still exist.

ERROR_ACTIVE_CONNECTIONS

2404

The device is in use by an active process and cannot be disconnected.

ERROR_DEVICE_IN_USE

3000

The specified print monitor is unknown.

ERROR_UNKNOWN_PRINT_MONITOR

3001

The specified printer driver is currently in use.

ERROR_PRINTER_DRIVER_IN_USE

3002

The spool file was not found.

ERROR_SPOOL_FILE_NOT_FOUND

3003

A StartDocPrinter call was not issued.

ERROR_SPL_NO_STARTDOC

3004

An AddJob call was not issued.

ERROR_SPL_NO_ADDJOB

3005

The specified print processor has already been installed.

ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED

3006

The specified print monitor has already been installed.

ERROR_PRINT_MONITOR_ALREADY_INSTALLED

3007

The specified print monitor does not have the required functions.

ERROR_INVALID_PRINT_MONITOR

3008

The specified print monitor is currently in use.

ERROR_PRINT_MONITOR_IN_USE

3009

The requested operation is not allowed when there are jobs queued to the printer.

ERROR_PRINTER_HAS_JOBS_QUEUED

3010

The requested operation is successful. Changes will not be effective until the system is rebooted.

ERROR_SUCCESS_REBOOT_REQUIRED

3011

The requested operation is successful. Changes will not be effective until the service is restarted.

ERROR_SUCCESS_RESTART_REQUIRED

4000

WINS encountered an error while processing the command.

ERROR_WINS_INTERNAL

4001

The local WINS cannot be deleted.

ERROR_CAN_NOT_DEL_LOCAL_WINS

4002

The importation from the file failed.

ERROR_STATIC_INIT

4003

The backup failed. Was a full backup done before?

ERROR_INC_BACKUP

4004

The backup failed. Check the directory to which you are backing the database.

ERROR_FULL_BACKUP

4005

The name does not exist in the WINS database.

ERROR_REC_NON_EXISTENT

4006

Replication with a nonconfigured partner is not allowed.

ERROR_RPL_NOT_ALLOWED

6118

The list of servers for this workgroup is not currently available.

ERROR_NO_BROWSER_SERVERS_FOUND