Setting up the Marvell PXA27x Processor Development Kit Hardware (MainstoneIII)
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
The following steps show you how to connect the Marvell PXA27x Processor Development Kit (MainstoneIII) to a development workstation.
To set up the Marvell PXA27x Processor Development Kit hardware (MainstoneIII)
Connect one end of the NULL modem cable to the COM port (BTUART) on the Marvell PXA27x Processor Development Kit (MainstoneIII), labeled J47, and connect the other end of the NULL modem cable to the COM1 port on your development workstation.
On your development workstation, configure your terminal emulation software (such as Microsoft HyperTerminal) to the following settings:
Bits per second Data bits Parity Stop bits Flow control 38400
8
None
1
None
Connect an available Ethernet cable to the Marvell PXA27x Processor Development Kit (MainstoneIII).
Plug the Marvell PXA27x Processor Development Kit (MainstoneIII) power cord to a power source.
See Also
Tasks
How to Use the BSP for the Marvell PXA27x Processor Development Kit (MainstoneIII)