CM_GPRSEntries Configuration Service Provider
This Configuration Service Provider configures the General Packet Radio Service (GPRS) entries on the device.
Note Access to this Configuration Service Provider is determined by Security roles. Because OEMs and Mobile Operators can selectively disallow access, ask them about the availability of this Configuration Service Provider. For more information, see Security Roles.
The following table shows the default settings.
Permissions | Read/Write |
Roles allowed to query and update setting | Manager
AuthenticatedUser |
Characteristics
<entryname>
Specifies the name of the connection. Fields under this characteristic specify parameters for this connection.Note The operating system does not allow duplicate entry names among the CM_VPNEntries, CM_PPPEntries, and CM_GPRSEntries Configuration Service Providers.
<entryname>/DevSpecificCellular
Used to set parameters in the device specific structure which is passed by RAS to the cellular TAPI device by the lineSetDevConfig parm before initiating the connection. This characteristic is only valid for connections that use the cellular TAPI service provider.<entryname>/DevSpecificUnimodem
Used to set parameters in the device-specific structure that is passed by RAS to the unimodem TAPI device by the lineSetDevConfig parm before initiating the connection. This characteristic is only valid for connections that use the unimodem TAPI service provider, and therefore would not typically be used by GPRS connections.
Parms
AltDnsAddr
Used in the <entryname> characteristic. This value is placed in the ipaddrDnsAlt member of the RASENTRY structure.For more information about RASENTRY, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Label Secondary DNS: Semantic phone-number Roles allowed to query and update setting Manager AuthenticatedUser
AltWinsAddr
Used in the <entryname> characteristic and is placed in the ipaddrWinsAlt member of the RASENTRY structure.For more information about RASENTRY, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
AreaCode
Specifies the area code portion of the phone number. This parm is used in the <entryname> characteristic and is placed in the szAreaCode member of the RASENTRY structure.This field should not be configured for GPRS connections.
For more information about RASENTRY, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
BearerInfoConnectionElement
Used in the <entryname>/DevSpecificCellular characteristic. This parm is placed in the dwConnectionElement member of the CELLDEVCONFIG structure. See CELLBEARERINFO for more information about this parm. See GSM specification 07.07 "6.7 Select bearer service type +CBST" for more information. The following table lists the possible values.Value Description 1 Transparent 2 NonTransparent 3 BothTransparent 4 Both NonTransparent The following table shows the default settings.
Permissions Read/write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
BearerInfoService
This parm is used in the <entryname>/DevSpecificCellular characteristic. The parm is placed in the dwService member of the CELLDEVCONFIG structure. Permitted values are one of the CELLDEVCONFIG_SERVICE_* values defined in tsp.h. See GSM specification 07.07 "6.7 Select bearer service type +CBST" for more information. The following table lists the possible values.Value Description 1 Async Modem 2 Sync Modem 3 Async PAD Access 4 Sync Packet Access The following table shows the default settings.
Permissions Read/write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
BearerInfoSpeed
This parm is used in the <entryname>/DevSpecificCellular characteristic. The parm is placed in the dwSpeed member of the CELLDEVCONFIG structure. Permitted values are one of the CELLDEVCONFIG_SPEED_* values defined in tsp.h. See GSM specification 07.07 "6.7 Select bearer service type +CBST" for more information. The following table lists the possible values.Value Description 1 Auto 2 300 v21 3 300 v110 4 12000 v22 5 1200/75 v23 6 1200 v110 7 1200 v120 8 2400 v22bis 9 2400 v26ter 10 2400 v110 11 2400 v120 12 4800 v32 13 4800 v110 14 4800 v120 15 9600 v32 16 9600 v34 17 9600 v110 18 9600 v120 19 14400 v34 20 14400 v110 21 14400 v120 22 19200 v34 23 19200 v110 24 19200 v120 25 28800 v34 26 28800 v110 27 28800 v120 28 38400 v110 29 38400 v120 30 48000 v110 31 48000 v120 32 56000 v110 33 56000 v120 34 56000 Transparent 35 64000 Transparent The following table shows the default settings.
Permissions Read/write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
BearerInfoValid
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether other bearer information parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bBearerInfoValid member of the CELLDEVCONFIG structure.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
CompressionInfoDirection
This parm is used in the <entryname>/DevSpecificCellular characteristic. The parm is placed in the dwDirection member of the CELLDEVCONFIG structure. See CELLDATACOMPINFO for more information about this parm. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information. The following table lists the possible values.Value Description 1 None 2 Transmit 3 Receive 4 Both The following table shows the default settings.
Permissions Read/write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
CompressionInfoMaxDictEntries
This parm is used in the <entryname>/DevSpecificCellular characteristic to control the maximum number of dictionary entries for V.42bis data compression. The value is placed in the dwMaxDictEntries member of the CELLDEVCONFIG structure. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information.The following table shows the default settings.
Permissions Read/write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
CompressionInfoMaxStringLength
This parm is used in the <entryname>/DevSpecificCellular characteristic to control the maximum string length for V.42bis data compression. The value is placed in the dwMaxStringLength member of the CELLDEVCONFIG structure. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information.The following table shows the default settings.
Permissions Read/write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
CompressionInfoRequired
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether data compression is required. Permitted values are 0 for OFF or 1 for ON. This value is placed in the dwRequired member of the CELLDEVCONFIG structure. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
CompressionInfoValid
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether other radio link information parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bDataCompInfoValid member of the CELLDEVCONFIG structure.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
CountryCode
This numeric parm is used in the <entryname> characteristic and is placed in the dwCountryCode member of the RASENTRY structure. This parm specifies the country code portion of the phone number. This field should not be configured for GPRS connections. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
Desc.<langid>
This parm is used in the <entryname> characteristic. A tag in the format of Desc.<langid> will be used as the language specific identifier for the specified entry. For example, the field <parm name="Desc.0409" value="PPP Dialup" /> will force "PPP Dialup" to be displayed in the UI to represent this connection when the phone is set to English language (language ID 0409). Descriptions for multiple languages may be provisioned using this mechanism, and the system will automatically switch among them if the user changes language preferences on the phone. If no Desc tag is provisioned for a given language, the system will default to the characteristic tag name used to create the entry.DestId
This parm is used in the <entryname> characteristic as a GUID that represents the unique ID of the network to which this entry connects. See the connmgr.h header file for predefined GUID values IID_DestNet*.The following table shows the default settings.
Permissions Read/write Data type String Label Connects to Roles allowed to query and update setting Manager AuthenticatedUser
DeviceName
This parm is used in the <entryname> characteristic. The parm is placed in the szDeviceName member of the RASENTRY structure, and specifies the local portion of the phone number. This string contains the name of a TAPI device to use with this phone-book entry, for example "XYZ Corp 28800 External". To enumerate the number of available RAS-capable devices, use the lineInitialize function. For Smartphone devices, by default, this member contains the name of the cellular TAPI device (specified in the tsp.h header file) of "Cellular Line". For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
DeviceSpecificRAW
This parm is used in the <entryname> characteristic to allow querying or setting the TAPI device specific data structure associated with the RAS entry. This duplicates the functionality of the various XML tags under the DevSpecificCellular and DevSpecificUnimodem characteristics, and also allows the setting of the device specific information for other non-standard TAPI service providers.The string value is interpreted as a hexadecimal byte stream, for example the string "FFFFFFFF" will set the structure to a single DWORD with all bits set. The resulting structure is passed into the TAPI service provider through lineSetDevConfig each time the connection is brought up.
Note This parameter should be used with caution because it allows direct manipulation of the underlying data
The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
DeviceType
This parm is used in the <entryname> characteristic and is placed in the szDeviceType member of the RASENTRY structure. The default value is RASDT_Modem. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
DialAsLocalCall
This parm is used in the <entryname> characteristic to control the setting of the RASEO_DialAsLocalCall member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this flag, see MSDN.Note For cellular devices, this flag is typically ignored, and the system is programmed to dial the full canonical number, for example "+<country code><area code><local number>".
The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
DnsAddr
This parm is used in the <entryname> characteristic and is placed in the ipaddrDns member of the RASENTRY structure. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Label Primary DNS: Semantic Type phone-number Roles allowed to query and update setting Manager AuthenticatedUser
Domain
This parm is used in the <entryname> characteristic and is placed in the szDomain member of the RASDIALPARAMS structure. This parm specifies the domain to be used during authentication. For more information about RASDIALPARAMS, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Label Domain: Semantic type url Roles allowed to query and update setting Manager AuthenticatedUser
Enabled
This parm is used in the <entryname> characteristic to enable or disable a connection entry without removing it from the system. Permitted values are 0 for OFF or 1 for ON.The following table shows the default settings.
Permissions Read/write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
FrameSize
This parm is used in the <entryname> characteristic and is placed in the dwFrameSize member of the RASENTRY structure. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
Framing
This parm is used in the <entryname> characteristic and is placed in the dwFramingProtocol member of the RASENTRY structure. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoAccessPointName
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the logical name to select the GPRS gateway. The value is placed in the wszAccessPointName member of the CELLGPRSCONNECTIONINFO structure. See GSM specification 07.07 "10.1.1 Define PDP Context +CGDCONT" for more information.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoAddress
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the packet address to use on the connection. The value is placed in the wszAddress member of the CELLGPRSCONNECTIONINFO structure. See GSM specification 07.07 "10.1.1 Define PDP Context +CGDCONT" for more information.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoDataCompression
This parm is used in the <entryname>/DevSpecificCellular characteristic to control PDP data compression. See the CELLGPRSCONNECTIONINFO structure and the GSM specification 07.07 "10.1.1 Define PDP Context +CGDCONT" for more information. The following table lists the possible values. The following table lists the possible values.Value Description 0 CELLDEVCONFIG_GPRSCOMPRESSION_UNKNOWN, compression status unknown. 1 CELLDEVCONFIG_GPRSCOMPRESSION_OFF, compression off. 2 CELLDEVCONFIG_GPRSCOMPRESSION_ON, compression on. The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoHeaderCompression
This parm is used in the <entryname>/DevSpecificCellular characteristic to control PDP header compression. See the CELLGPRSCONNECTIONINFO structure, and the specification GSM 07.07 "10.1.1 Define PDP Context +CGDCONT" for more information. The following table lists the possible values.Value Description 0 CELLDEVCONFIG_GPRSCOMPRESSION_UNKNOWN, compression status unknown. 1 CELLDEVCONFIG_GPRSCOMPRESSION_OFF, compression off. 2 CELLDEVCONFIG_GPRSCOMPRESSION_ON, compression on. The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoL2ProtocolType
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the protocol for level 2 information transmission. See the CELLGPRSCONNECTIONINFO structure, for more information about this parm. See GSM specification 07.07 "10.1.6 Enter data state +CGDATA" for more information. The following table lists the possible values.Value Description 1 NULL 2 PPP 3 PAD 4 X25 The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoMinQOSDelayClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Minimum Quality of Service Profile delay class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.3 Quality of Service Profile (Minimum acceptable) +CGQMIN" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 Predictive 1 3 Predictive 2 4 Predictive 3 5 Best Effort The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoMinQOSMeanThruClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Minimum Quality of Service Profile mean throughput class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.3 Quality of Service Profile (Minimum acceptable) +CGQMIN" for more information. The following table lists the possible values.The following table shows the default settings:
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoMinQOSPeakThruClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Minimum Quality of Service Profile peak throughput class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.3 Quality of Service Profile (Minimum acceptable) +CGQMIN" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 8000 3 16000 4 32000 5 64000 6 128000 7 256000 8 512000 9 1024000 10 2048000 The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoMinQOSPrecedenceClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Minimum Quality of Service Profile precedence class. Permitted values are one of the CELLDEVCONFIG_GPRSPRECEDENCECLASS_* values specified in the tsp.h header file. See GSM specification 07.07 "10.1.3 Quality of Service Profile (Minimum acceptable) +CGQMIN" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 High 3 Normal 4 Low The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoMinQOSReliabilityClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Minimum Quality of Service Profile reliability class. Permitted values are one of the CELLDEVCONFIG_GPRSRELIABILITYCLASS_* values specified in the tsp.h header file. See GSM specification 07.07 "10.1.3 Quality of Service Profile (Minimum acceptable) +CGQMIN" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 Class 1 3 Class 2 4 Class 3 5 Class 4 6 Class 5 The following table shows the default settings
Permissions Read/Write Data type Integer Roles allowed to query and update setting Operator Operator - TPS
Manager
AuthenticatedUser
GPRSInfoMinQOSSettingsValid
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether other Minimum Quality of Service parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bMinimumQOSSettingsValid member of the CELLGPRSCONNECTIONINFO structure associated with the connection.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoParameters
This parm is used in the <entryname>/DevSpecificCellular characteristic for specifying Protocol-specific values when defining a GPRS context. This parameter specifies a text string that is placed in the szParameters member of the CELLGPRSCONNECTIONINFO structure. See GSM specification 07.07 "10.1.1 Define PDP Context +CGDCONT" for more information.GPRSInfoProtocolType
This parm is used in the <entryname>/DevSpecificCellular characteristic. See CELLGPRSCONNECTIONINFO structure for more information about this parm. See GSM specification 07.07 "10.1.1 Define PDP Context +CGDCONT" for more information. The following table lists the possible values.Value Description 1 X25 2 IP 3 IHOSP 4 PPP The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoQOSDelayClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Requested Quality of Service Profile delay class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.2 Quality of Service Profile (Requested) +CGQREQ" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 Predictive 1 3 Predictive 2 4 Predictive 3 5 Best Effort The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting OEM Operator
Operator - TPS
Manager
AuthenticatedUser
GPRSInfoQOSMeanThruClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Requested Quality of Service Profile mean throughput class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.2 Quality of Service Profile (Requested) +CGQREQ" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 100 3 200 4 500 5 1000 6 2000 7 5000 8 10000 9 20000 10 50000 11 100000 12 200000 13 500000 14 1000000 15 2000000 16 5000000 17 10000000 18 20000000 19 50000000 20 Best Effort The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoQOSPeakThruClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Requested Quality of Service Profile peak throughput class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.2 Quality of Service Profile (Requested) +CGQREQ" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 8000 3 16000 4 32000 5 64000 6 128000 7 256000 8 512000 9 1024000 10 2048000 The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoQOSPrecedenceClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Requested Quality of Service Profile precedence class. Permitted values are one of the CELLDEVCONFIG_GPRSPRECEDENCECLASS_* values specified in the tsp.h header file. See GSM specification 07.07 "10.1.2 Quality of Service Profile (Requested) +CGQREQ" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 High 3 Normal 4 Low The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoQOSReliabilityClass
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the Requested Quality of Service Profile reliability class. See CELLGPRSQOSSETTINGS for more information about this parm. See GSM specification 07.07 "10.1.2 Quality of Service Profile (Requested) +CGQREQ" for more information. The following table lists the possible values.Value Description 1 Subscribed 2 Class 1 3 Class 2 4 Class 3 5 Class 4 6 Class 5 The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoQOSSettingsValid
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether other Requested Quality of Service parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bRequestedQOSSettingsValid member of the CELLGPRSCONNECTIONINFO structure.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
GPRSInfoValid
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether other GPRS parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bGPRSConnectionInfoValid member of the CELLDEVCONFIG structure.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
IpAddr
This parm is used in the <entryname> characteristic and is placed in the ipaddr member of the RASENTRY structure. This parm specifies the IP address to be used while this connection is active. This member is ignored unless dwfOptions specifies the RASEO_SpecificIpAddr member. For more information about RASENTRY, see MSDN.The following table shows the default settings for this parm.
Permissions Read/Write Data type String Label IP address: Semantic type url Roles allowed to query and update setting Manager AuthenticatedUser
IpHeaderCompression
This parm is used in the <entryname> characteristic to control the setting of the RASEO_IpHeaderCompression member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this flag, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
Password
This parm is used in the <entryname> characteristic and is placed in the szPassword member of the RASDIALPARAMS structure. This parm specifies the password to be used during authentication. If left empty, the system will optionally automatically prompt for the user name and password when making a connection. This behavior is controlled by the RequirePw parm. Queries of the Password field will return a string composed of asterisks ('*').On operations to set the password, passing in this same string will cause the new password to be ignored and will not change the existing password. For more information about RASDIALPARAMS, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Label Password: Semantic type alphanumeric-password Roles allowed to query and update setting Manager AuthenticatedUser
Phone
This parm is used in the <entryname> characteristic and is placed in the szLocalPhoneNumber member of the RASENTRY structure. This parm specifies the local portion of the phone number. This field should not be configured for GPRS connections. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
RadioLinkInfoAckTimer
This parm is used in the <entryname>/DevSpecificCellular to be placed in the dwAckTimer member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" T1 parameter for more information.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
RadioLinkInfoIws
This parm is used in the <entryname>/DevSpecificCellular to be placed in the dwIws member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" iws parameter for more information.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
RadioLinkInfoMws
This parm is used in the <entryname>/DevSpecificCellular to be placed in the dwMws member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" mws parameter for more information.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
RadioLinkInfoResequenceTimer
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwResequenceTimer member of the CELLRADIOLINKINFO structure as defined in the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" T4 parameter for more information.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
RadioLinkInfoRetransmitAttempts
This parm is used in the <entryname>/DevSpecificCellular to specify the value to be placed in the dwRetransmitAttempts member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" N2 parameter for more information.The following table shows the default settings:
Permissions Read/Write Data type Integer Roles allowed to query and update setting OEM Operator
Operator - TPS
Manager
AuthenticatedUser
RadioLinkInfoValid
This parm is used in the <entryname>/DevSpecificCellular characteristic to specify whether other radio link information parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bRadioLinkInfoValid member of the CELLDEVCONFIG structure.The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
RadioLinkInfoVersion
This parm is used in the <entryname>/DevSpecificCellular to be placed in the dwVersion member of the CELLGPRSQOSSETTINGS structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" ver parameter for more information.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
RemoteDefaultGateway
This parm is used in the <entryname> characteristic and controls the setting of the RASEO_RemoteDefaultGateway member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. Windows CE sets this flag only when a new RASENTRY structure is populated with default values; however, Windows CE ignores this flag and does not modify the default route.Value Description 1 Subscribed 2 100 3 200 4 500 5 1000 6 2000 7 5000 8 10000 9 20000 10 50000 11 100000 12 200000 13 500000 14 1000000 15 2000000 16 5000000 17 10000000 18 20000000 19 50000000 20 Best Effort The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
RequireDataEncryption
Controls the setting of the RASEO_RequireDataEncryption member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.This parm is used in the <entryname> characteristic.
For more information about RASENTRY and the use of this flag, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
RequireEncryptedPw
This parm is used in the <entryname> characteristic to control the setting of the RASEO_RequireEncryptedPw member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.For more information about RASENTRY and the use of this flag, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
RequireMsEncryptedPw
This parm is used in the <entryname> characteristic to control the setting of the RASEO_RequireMsEncryptedPw member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.For more information about RASENTRY and the use of this flag, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
RequirePw
This parm is used in the <entryname> characteristic to control whether the system should prompt for a user name/password/domain name before dialing the phone. If set to 1, the system will prompt if no password or user name is provisioned. If set to 0, the system will not prompt for password before dialing even if no password or user name is provisioned. For GPRS connections, the default value of this parameter is 0.The following table shows the default settings.
Permissions Read/Write Data type Integer Roles allowed to query and update setting Manager AuthenticatedUser
Script
This parm is used in the <entryname> characteristic and is placed in the szScript member of the RASENTRY structure. This parm specifies a string containing the name of the script file. The file name should be a full path. For more information about RASENTRY, see MSDN.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
SpecificIpAddr
This parm is used in the <entryname> characteristic to control the setting of the RASEO_SpecificIpAddr flag in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.For more information about RASENTRY and the use of this flag, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
SpecificNameServers
Controls the setting of the RASEO_SpecificNameServers member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.This parm is used in the <entryname> characteristic.
For more information about RASENTRY and the use of this flag, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
SwCompression
Controls the setting of the RASEO_SwCompression member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.This parm is used in the <entryname> characteristic
For more information about RASENTRY and the use of this flag, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
UseCountryAndAreaCodes
Controls the setting of the RASEO_UseCountryAndAreaCodes member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON.This parm is used in the <entryname> characteristic.
For more information about RASENTRY and the use of this flag, see MSDN.
Note For cellular devices, this flag is typically ignored, and the system is programmed to dial the full canonical number; for example, "+<country code><area code><local number>".
The following table shows the default settings.
Permissions Read/Write Data type Boolean Roles allowed to query and update setting Manager AuthenticatedUser
UserName
Specifies the user name to be used during authentication. If this parm is empty, based on the RequirePw parm setting, the system can automatically prompt for the user name and password when making a connection .This parm is used in the <entryname> characteristic and is placed in the szUserName member of the RASDIALPARAMS structure.
For more information about RASDIALPARAMS, see MSDN.
The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
WinsAddr
Specifies the IP address of the WINS server to be used while the connection is active. This member is ignored unless dwfOptions specifies the RASEO_SpecificNameServers member.The following table shows the default settings.
Permissions Read/Write Data type String Roles allowed to query and update setting Manager AuthenticatedUser
For more information about RASENTRY, see MSDN.
Elements
Elements | Available |
---|---|
noparm | No |
nocharacteristic | Yes |
characteristic-query | Yes |
parm-query | Yes |
For information about specific elements, see MSPROV DTD Elements.
See Also
Configuration Service Provider Reference for Windows Mobile| CM_GPRSEntries Configuration Service Provider
Last updated on Friday, April 22, 2005
© 2005 Microsoft Corporation. All rights reserved.
Send feedback on this topic to the authors.