Share via


Setting up the AMD DBAu1500 Development Board Hardware (Windows CE 5.0)

Send Feedback

Before you can download the Windows CE boot loader to your standard development board (SDB), you must set up and connect the AMD DBAu1500 Development Board to a development workstation.

To set up the AMD DBAu1500 Development Board hardware

  1. Connect a serial cable to the debug serial port connector.

    The AMD DBAu1500 Development Board uses a regular serial cable to connect to an external device, such as a modem, and does not use a null modem cable like other SDBs.

  2. Connect an Ethernet cable to the network connector on the AMD DBAu1500 Development Board and to the development workstation or Ethernet hub.

  3. On the motherboard, insert the video card into the PCI slot.

  4. Connect the power supply to the board.

See Also

How to Use the BSP for the AMD DBAu1500 Development Board | Modifying the AMD DBAu1500 Development Board Switches and Jumpers | Downloading the Boot Loader to the AMD DBAu1500 Development Board

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.