EAP_ATTRIBUTE_TYPE enumeration (eaptypes.h)

Article
01/31/2022

The EAP_ATTRIBUTE_TYPE enumeration defines the set of possible EAP attribute types available on an authenticating entity.

Further details for values in this enumerated type are obtained by referring to one of the following references: RFC 2865, RFC 2866, RFC 2869, RFC 2868, RFC 3162, RFC 3579, or RFC 3580.

Syntax

typedef enum _EAP_ATTRIBUTE_TYPE {
  eatMinimum = 0,
  eatUserName,
  eatUserPassword,
  eatMD5CHAPPassword,
  eatNASIPAddress,
  eatNASPort,
  eatServiceType,
  eatFramedProtocol,
  eatFramedIPAddress,
  eatFramedIPNetmask,
  eatFramedRouting = 10,
  eatFilterId,
  eatFramedMTU,
  eatFramedCompression,
  eatLoginIPHost,
  eatLoginService,
  eatLoginTCPPort,
  eatUnassigned17,
  eatReplyMessage,
  eatCallbackNumber,
  eatCallbackId = 20,
  eatUnassigned21,
  eatFramedRoute,
  eatFramedIPXNetwork,
  eatState,
  eatClass,
  eatVendorSpecific,
  eatSessionTimeout,
  eatIdleTimeout,
  eatTerminationAction,
  eatCalledStationId = 30,
  eatCallingStationId,
  eatNASIdentifier,
  eatProxyState,
  eatLoginLATService,
  eatLoginLATNode,
  eatLoginLATGroup,
  eatFramedAppleTalkLink,
  eatFramedAppleTalkNetwork,
  eatFramedAppleTalkZone,
  eatAcctStatusType = 40,
  eatAcctDelayTime,
  eatAcctInputOctets,
  eatAcctOutputOctets,
  eatAcctSessionId,
  eatAcctAuthentic,
  eatAcctSessionTime,
  eatAcctInputPackets,
  eatAcctOutputPackets,
  eatAcctTerminateCause,
  eatAcctMultiSessionId = 50,
  eatAcctLinkCount,
  eatAcctEventTimeStamp = 55,
  eatMD5CHAPChallenge = 60,
  eatNASPortType,
  eatPortLimit,
  eatLoginLATPort,
  eatTunnelType,
  eatTunnelMediumType,
  eatTunnelClientEndpoint,
  eatTunnelServerEndpoint,
  eatARAPPassword = 70,
  eatARAPFeatures,
  eatARAPZoneAccess,
  eatARAPSecurity,
  eatARAPSecurityData,
  eatPasswordRetry,
  eatPrompt,
  eatConnectInfo,
  eatConfigurationToken,
  eatEAPMessage,
  eatSignature = 80,
  eatARAPChallengeResponse = 84,
  eatAcctInterimInterval = 85,
  eatNASIPv6Address = 95,
  eatFramedInterfaceId,
  eatFramedIPv6Prefix,
  eatLoginIPv6Host,
  eatFramedIPv6Route,
  eatFramedIPv6Pool,
  eatARAPGuestLogon = 8096,
  eatCertificateOID,
  eatEAPConfiguration,
  eatPEAPEmbeddedEAPTypeId,
  eatPEAPFastRoamedSession = 8100,
  eatFastRoamedSession = 8100,
  eatEAPTLV = 8102,
  eatCredentialsChanged,
  eatInnerEapMethodType,
  eatClearTextPassword = 8107,
  eatQuarantineSoH = 8150,
  eatCertificateThumbprint = 8250,
  eatPeerId = 9000,
  eatServerId,
  eatMethodId,
  eatEMSK,
  eatSessionId,
  eatReserved
} EAP_ATTRIBUTE_TYPE, EapAttributeType;

Constants

eatMinimum
Value: 0
Specifies a value equal to zero, and used as the NULL terminator in any array of
EAP_ATTRIBUTE structures.

This attribute type is consumed by PPP client supplicants.

eatUserName
Specifies the name of the user to be authenticated. This attribute type is also used when the user's password is changed. For Routing and Remote Access Service (RRAS) authentication sessions, the identity string (name) of the authenticating user is sent to IAS as part of the request attributes. The pValue member of
EAP_ATTRIBUTE for this type points to a multi-byte string with no NULL termination character. For more information, see
RFC 2865.

This attribute type is exported by MS-CHAPv2 methods and by PEAP methods. It is consumed by PPP server supplicants.

eatUserPassword
Specifies the password of the user to be authenticated. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatMD5CHAPPassword
Specifies the password provided by the user in response to an MD5 Challenge Handshake Authentication Protocol (CHAP) challenge. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatNASIPAddress
Specifies the IP address of the Network Access Server (NAS) that is requesting user authentication. An Access-Request should specify either an NAS IP address or an NAS identifier. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatNASPort
Specifies the physical or virtual private network (VPN) through which the user is connecting to the NAS. Note that this value is not a port number in the sense of TCP or UDP. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatServiceType
Specifies the type of service the user has requested or the type of service to be provided. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatFramedProtocol
Specifies the type of framed protocol to use for framed access, for example SLIP, PPP, or ARAP (AppleTalk Remote Access Protocol). The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatFramedIPAddress
Specifies the IP address that is configured for the user requesting authentication. This attribute is typically returned by the authentication provider. However, the NAS may use it in an authentication request to specify a preferred IP address. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatFramedIPNetmask
Specifies the IP network mask for a user that is a router to a network. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatFramedRouting
Value: 10
Specifies the routing method for a user that is a router to a network. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatFilterId
Specifies the name of the filter list for the user requesting authentication. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatFramedMTU
Specifies the Maximum Transmission Unit (MTU) for the user. This attribute is used in cases where the MTU is not negotiated through some other means, such as PPP. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatFramedCompression
Specifies a compression protocol to use for the connection. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatLoginIPHost
Specifies the system with which to connect the user. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatLoginService
Specifies the service to use to connect the user to the host specified by eatLoginIPHost. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatLoginTCPPort
Specifies the port to which to connect the user. This attribute is present only if the eatLoginService attribute is present. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatUnassigned17
This value is currently unassigned.

This attribute type is not used by EAPHost methods or supplicants.

eatReplyMessage
Specifies a message to display to the user. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

This attribute type consumed by the PPP server supplicant. This attribute type should not be used by any other method or supplicant. eatEAPMessage should be used to sent displayable messages whenever possible. For more information, see RFC 3580.

eatCallbackNumber
Specifies a callback number. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatCallbackId
Value: 20
Specifies a location to call back. The value of this attribute is interpreted by the NAS. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatUnassigned21
This value is currently unassigned.

This attribute type is not used by EAPHost methods or supplicants.

eatFramedRoute
Specifies routing information to configure on the NAS for the user. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatFramedIPXNetwork
Specifies the IPX network number to configure for the user. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatState
Specifies state information provided to the client by the server. For RRAS authentication sessions, if authentication completed successfully and IAS returned attributes, then this state information is saved and used as input when constructing the request attributes for IAS during the next packet cycle. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. Refer to
RFC 2865 for detailed information about this value.

This attribute type is consumed by PPP server supplicants.

eatClass
Specifies a value that is provided to the NAS by the authentication provider. The NAS should use this value when communicating with the accounting provider. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatVendorSpecific
Specifies a field for vendor-supplied extended attributes.

This field is used to store Microsoft Point-to-Point Encryption (MPPE) keys consumed by the 802.1X supplicant. For more information, see RFC 2865.

The following table shows the structure of the data pointed to by the pValue member of
EAP_ATTRIBUTE for this type.

First Byte	Last Byte	Description
0	3	Length: 4 bytes The vendor identifier. This field always has a value of 311.
4	4	Length: 1 byte The type of MPPE key. If the attribute refers to a MPPE send key, then this field has a value of 16. If the attribute refers to a MPPE receive key, then this field has a value of 17.
5	5	Length: 1 byte The MPPE vendor-specific attribute length. This field always has a value of 52.
6	7	Length: 2 bytesSalt. This field always has a value of 0.
8	8	Length: 1 byte The MPPE key length. This field always has a value of 32.
9	40	Length: 32 bytes The MPPE key. The field contents are as follows: For MPPE send keys used on a client, this field contains the first 32 bytes (bytes 0-31) of the master session key (MSK). For MPPE send keys used on a server, this field contains the second 32 bytes (bytes 32-63) of the MSK. For MPPE receive keys used on a client, this field contains the second 32 bytes (bytes 32-63) of the MSK. For MPPE receive keys used on a server, this field contains the first 32 bytes (bytes 0-31) of the MSK.
41	55	Length: 15 bytesPadding.

This attribute type is consumed by 802.1X supplicants.

eatSessionTimeout
Specifies the maximum number of seconds for which to provide service to the user. After this time, the session is terminated. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

This attribute type is typically used by EAP methods to set the timeout duration for authentication within an Access-Challenge packet. The duration of the timeout is determined by IAS, not the EAP method.

For RRAS authentication sessions, if authentication succeeded and there is a pending packet to be sent, the packet is sent with an interactive timeout if the corresponding eatSessionTimeout value is greater than 10.

This attribute type is consumed by PPP server supplicants.

eatIdleTimeout
Specifies the maximum number of consecutive seconds the session can be idle. If the idle time exceeds this value, the session is terminated. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatTerminationAction
Specifies an action the server performs when time the connection terminates. Refer to the above-referenced files for detailed information about this value. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatCalledStationId
Value: 30
Specifies the phone number called using Dialed Number Identification (DNIS) or similar technology. The phone number called by the user may be different than the phone number from which the call originated. This attribute type may also be used to store other types of information, such as MAC addresses. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see RFC 3580.

eatCallingStationId
Specifies the originating phone number for a call, using Automatic Number Identification (ANI) or similar technology. This attribute type may also be used to store other types of information, such as MAC addresses. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see RFC 3580.

eatNASIdentifier
Specifies the NAS identifier. An Access-Request should specify either an NAS identifier or an NAS IP address. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatProxyState
Specifies a value that a proxy server includes when forwarding an authentication request. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatLoginLATService
Not used. For more information, see
RFC 2865.

eatLoginLATNode
Not used. For more information, see
RFC 2865.

eatLoginLATGroup
Not used. For more information, see
RFC 2865.

eatFramedAppleTalkLink
Specifies the AppleTalk network number for the user when the user is another router. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatFramedAppleTalkNetwork
Specifies the AppleTalk network number that the NAS should use to allocate an AppleTalk node for the user. This attribute is used only when the user is not another router. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatFramedAppleTalkZone
Specifies the AppleTalk default zone for the user. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctStatusType
Value: 40
Specifies whether the accounting provider should start or stop accounting for the user. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctDelayTime
Specifies the length of time that the client has been attempting to send the current request. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctInputOctets
Specifies the number of octets that have been received during the current accounting session. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctOutputOctets
Specifies the number of octets that were sent during the current accounting session. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctSessionId
Specifies a value to enable the identification of matching start and stop records within a log file. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctAuthentic
Specifies, to the accounting provider, how the user was authenticated; for example by Directory Services, RADIUS, or some other authentication provider. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctSessionTime
Specifies the number of seconds that have elapsed in the current accounting session. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctInputPackets
Specifies the number of packets that have been received during the current accounting session. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctOutputPackets
Specifies the number of packets that have been sent during the current accounting session. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctTerminateCause
Specifies how the current accounting session was terminated. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctMultiSessionId
Value: 50
Specifies a value to enable the identification of related accounting sessions within a log file. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctLinkCount
Specifies the number of links if the current accounting session is using a multilink connection. For more information, see
RFC 2866.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctEventTimeStamp
Value: 55
Specifies an attribute that is included in an accounting request packet. It specifies the time that the event took place. For more information, see RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatMD5CHAPChallenge
Value: 60
Specifies the CHAP challenge sent by the NAS to a CHAP user. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatNASPortType
Specifies the type of the port through which NAS is authenticating the user, for example, asynchronous, ISDN, virtual. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2865.

eatPortLimit
Specifies the number of ports the NAS should make available to the user for multilink sessions. For more information, see
RFC 2865.

This attribute type is not used by EAPHost methods or supplicants.

eatLoginLATPort
Not used. For more information, see
RFC 2865.

eatTunnelType
Specifies the tunneling protocol used.

This attribute type is not used by EAPHost methods or supplicants.

eatTunnelMediumType
Specifies which transport medium to use when creating a tunnel for those protocols (such as L2TP) that can operate over multiple transports.

This attribute type is not used by EAPHost methods or supplicants.

eatTunnelClientEndpoint
Points to the address of the initiator end of the tunnel.

This attribute type is not used by EAPHost methods or supplicants.

eatTunnelServerEndpoint
Points to the address of the server end of the tunnel.

This attribute type is not used by EAPHost methods or supplicants.

eatARAPPassword
Value: 70
Specifies a password to use for AppleTalk Remote Access Protocol (ARAP) authentication. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatARAPFeatures
Specifies information that an NAS should send back to the user in an ARAP "feature flags" packet. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatARAPZoneAccess
Specifies how to use the ARAP zone list for the user. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatARAPSecurity
Specifies an ARAP security module to use during a secondary authentication phase between the NAS and the user. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatARAPSecurityData
Specifies the data to use with an ARAP security module. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatPasswordRetry
Specifies the number of password retry attempts to permit the user access. This attribute type is deprecated for EAP and RADIUS/EAP. For more information, see RFC 3579.

This attribute type is not used by EAPHost methods or supplicants.

eatPrompt
Specifies whether the NAS should echo the user response to a challenge. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatConnectInfo
Specifies information about the type of connection the user is using. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatConfigurationToken
Specifies user-profile information in communications between RADIUS Proxy Servers and RADIUS Proxy Clients. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatEAPMessage
Specifies that EAP information be sent directly between the user and the authentication provider. For RRAS authentication sessions, this attribute type is used to retrieve the EAP message from the authenticator and send the message to the client. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see
RFC 2869.

This attribute type is consumed by PPP server supplicants.

eatSignature
Value: 80
Specifies a signature to include with CHAP, EAP, or ARAP packets. For more information,
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatARAPChallengeResponse
Value: 84
Specifies the response to a Apple Remote Access Protocol (ARAP) challenge. In ARAP, either the server or the client may respond to challenges. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatAcctInterimInterval
Value: 85
Specifies the time, in seconds, between accounting updates. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatNASIPv6Address
Value: 95
The IPv6 address of the NAS requesting user authentication. This address should be unique to the NAS within the scope of the RADIUS server. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see RFC 3162.

eatFramedInterfaceId
The IPv6 interface identifier to be configured for the user. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see RFC 3162.

eatFramedIPv6Prefix
The IPv6 prefix (and corresponding route) to be configured for the user. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string. For more information, see RFC 3162.

eatLoginIPv6Host
Not used.

eatFramedIPv6Route
Not used.

eatFramedIPv6Pool
Not used.

eatARAPGuestLogon
Value: 8096
Specifies a Apple Remote Access Protocol (ARAP) guest logon. For more information, see
RFC 2869.

This attribute type is not used by EAPHost methods or supplicants.

eatCertificateOID
The object identifier (OID) present on the certificate. This attribute type is used in certificate-based authentication sessions. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string.

This attribute type is exported by EAP-TLS and NPS methods.

eatEAPConfiguration
Not used.

eatPEAPEmbeddedEAPTypeId
The identifier of the inner EAP method used in PEAP authentication. The pValue member of
EAP_ATTRIBUTE for this type points to a DWORD. Only the least significant byte of the DWORD is meaningful.

This attribute type is exported by PEAP methods and is not consumed by any supplicant.

eatPEAPFastRoamedSession
Value: 8100
Specifies whether PEAP fast reconnect is used by the authenticator. The pValue member of
EAP_ATTRIBUTE for this type points to a DWORD. If pValue points to 0, then fast reconnect is not used by the authenticator. If pValue points to a nonzero value, then fast reconnect is used by the authenticator.

This attribute type is exported by PEAP methods and consumed by PPP client supplicants.

eatFastRoamedSession
Value: 8100
TBD

eatEAPTLV
Value: 8102
An EAP-TLV attribute. This attribute type is used to handle statement of health (SoH) requests and SoH responses from the server.

The following table shows the structure of the data pointed to by the pValue member of
EAP_ATTRIBUTE for this type.

First Byte	Last Byte	Description
0	1	Length: 2 bytes The buffer type. This field always has a value of 7.
2	3	Length: 2 bytes The length of the remaining contents of the buffer. For SoH requests from the server, this field has a value of 6. For SoH responses from the server, calculate the length by adding 8 to the number of bytes in the SoH payload.
4	7	Length: 4 bytes The vendor identifier. This field always has a value of 311.
8	9	Length: 2 bytes The SoH type. For SoH requests from the server, this field has a value of 2. For SoH responses from the server, this field has a value of 3.
10	11	Length: 2 bytes The number of bytes of data in the SoH payload.
12		Length: Variable The SoH payload returned by the NAP system. The supplicant should not attempt to interpret this data.

This attribute type is consumed by PPP client supplicants and by EAPHost supplicants.

eatCredentialsChanged
Specifies whether credentials have changed during EAP authentication. The pValue member of
EAP_ATTRIBUTE for this type points to a DWORD. If pValue points to 0, then the credentials have not changed. If pValue points to a nonzero value, then credentials have changed.

This attribute type may be exported by MS-CHAPv2 methods, and is consumed by PPP client supplicants.

eatInnerEapMethodType
The inner EAP method used inside native tunnel methods. The pValue member of
EAP_ATTRIBUTE for this type points to an EAP_METHOD_TYPE structure.

This attribute type is exported by EAP methods.

eatClearTextPassword
Value: 8107
The password, in clear text, of the user to be authenticated. This attribute type is sent by EAP methods that use EAPHost to raise the identity user interface. The pValue member of
EAP_ATTRIBUTE for this type points to an EAP_METHOD_TYPE structure.

This attribute type is exported by EAPHost.

eatQuarantineSoH
Value: 8150
Contains SoH request and response information used during EAP authentication. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string.

This attribute type is exported by EAPHost and PEAP methods, and consumed by PPP server supplicants.

eatCertificateThumbprint
Value: 8250
TBD

eatPeerId
Value: 9000
The peer identity provided in the identity response message (EAP-Response/Identity). This identity may be different than the peer identity authenticated by the EAP method. The pValue member of
EAP_ATTRIBUTE for this type points to an ASCII string. The string will be NULL if the EAP peer identity does not exist. For more information, see the Key Management Framework draft specification.

This attribute type is exported by EAP methods and consumed by supplicants.

eatServerId
The identity of the server used when the EAP method authenticates to the server. The pValue member of
EAP_ATTRIBUTE for this type points to an ASCII string. The string will be NULL if an EAP method does not define a method-specific peer identity. For more information, see the Key Management Framework draft specification.

This attribute type is exported by EAP methods and consumed by supplicants.

eatMethodId
A temporally unique method identifier that identifies an EAP session of a given type between a peer and a server. Any EAP method that derives keys must specify this attribute type. The pValue member of
EAP_ATTRIBUTE for this type points to a DWORD. For more information, see the Key Management Framework draft specification.

This attribute type is exported by EAPHost methods and other EAP methods, and consumed by supplicants.

eatEMSK
The extended session master key (EMSK). This key material is derived between the peer and the server, and should not be shared with a third party. The pValue member of
EAP_ATTRIBUTE for this type points to a byte string, which should contain at least 64 octets of key material. For more information, see the Key Management Framework draft specification.

This attribute type is exported by EAP methods and consumed by supplicants.

eatSessionId
Windows Vista with SP1 or later: An attribute type that carries the session identity.

eatReserved
Not used.

Requirements

Requirement	Value
Minimum supported client	Windows Vista [desktop apps only]
Minimum supported server	Windows Server 2008 [desktop apps only]
Header	eaptypes.h

EAP_ATTRIBUTE_TYPE enumeration (eaptypes.h)

Syntax

Constants

Requirements

See also

Feedback

Feedback

Additional resources