Share via


Silverlight Path Markup Syntax

This overview describes the Extensible Application Markup Language (XAML) usage syntax for describing paths. Microsoft Silverlight supports a powerful and complex mini-language that you can use to describe geometric paths.

This topic contains the following sections:

  • Prerequisites
  • The Path Mini-Language
  • Move Command
  • Draw Commands
  • The Close Command
  • Point Syntax
  • Special Values

Prerequisites

To understand this topic, you should be familiar with the basic features of Geometry objects. For more information, see the Silverlight Geometries Overview.

The Path Mini-Language

Silverlight provides a mini-language attribute syntax for describing geometric paths. You use this mini-language when setting a property of type Geometry, such as the Clip property of a UIElement or the Data property of a Path element. The following example uses the path attribute syntax to create a shape.

XAML
<Canvas 
  xmlns="https://schemas.microsoft.com/client/2007" 
  xmlns:x="https://schemas.microsoft.com/winfx/2006/xaml">
  <Path Stroke="Black" Fill="Gray"
    Data="M 10,100 C 10,300 300,-200 300,100" />
</Canvas>

A Note About White Space

For brevity, a single space is shown in the syntax sections that follow, but multiple spaces are also acceptable wherever a single space is shown.

Two numbers do not have to be separated by a comma or white space, but only when the resulting string is unambiguous. For example, 2..3 is actually two numbers: "2." And ".3". Similarly, 2-3 consists of the two numbers "2" and "-3". Spaces are not required before or after commands, either.

Syntax

The Extensible Application Markup Language (XAML) path syntax consists of an optional FillRule value and one or more figure descriptions.

Path XAML attribute usage

<object property ="[fillRulefigureDescription[ figureDescription]*" ... />

Term Description

fillRule

FillRule

Specifies whether the path uses the EvenOdd or NonZero fill rule value.

  • F0 specifies the EvenOdd fill rule.

  • F1 specifies the Nonzero fill rule.

If you omit this command, the path uses the default behavior, which is EvenOdd. If you specify this command, you must place it first.

figureDescription

A figure composed of a move command, draw commands, and an optional close command.

moveCommand drawCommands [ closeCommand ]

moveCommand

A move command that specifies the start point of the figure. See the Move Command section.

drawCommands

One or more draw commands that describe the figure's contents. See the Draw Commands section.

closeCommand

An optional close command that closes the figure. See the Close Command section.

Move Command

Specifies the start point of a new figure.

Syntax

M startPoint

- or -

m startPoint

Term Description

startPoint

Point

The start point of a new figure.

An uppercase M indicates that startPoint is an absolute value; a lowercase m indicates that startPoint is an offset to the previous point, or (0,0) if none exists. If you list multiple points after the move command, a line is drawn to those points as if you specified the line command.

Draw Commands

A draw command can consist of several shape commands. The following shape commands are available: line, horizontal line, vertical line, cubic Bezier curve, quadratic Bezier curve, smooth cubic Bezier curve, smooth quadratic Bezier curve, and elliptical arc.

You enter each command by using either an uppercase or a lowercase letter: uppercase letters denote absolute values and lowercase letters denote relative values: the control points for that segment are relative to the end point of the preceding example. When sequentially entering more than one command of the same type, you can omit the duplicate command entry; for example, L 100,200 300,400 is equivalent to L 100,200 L 300,400.

Line Command

Creates a straight line between the current point and the specified end point. l 20 30 and L 20,30 are examples of valid line commands.

Syntax

L endPoint

- or -

l endPoint

Term Description

endPoint

Point

The end point of the line.

Horizontal Line Command

Creates a horizontal line between the current point and the specified x-coordinate. H 90 is an example of a valid horizontal line command.

Syntax

H x

- or -

h x

Term Description

x

Double

The x-coordinate of the end point of the line.

Vertical Line Command

Creates a vertical line between the current point and the specified y-coordinate. v 90 is an example of a valid vertical line command.

Syntax

V y

- or -

v y

Term Description

y

Double

The y-coordinate of the end point of the line.

Cubic Bezier Curve Command

Creates a cubic Bezier curve between the current point and the specified end point by using the two specified control points (controlPoint1 and controlPoint2). C 100,200 200,400 300,200 is an example of a valid curve command.

Syntax

C controlPoint1 controlPoint2 endPoint

- or -

c controlPoint1 controlPoint2 endPoint

Term Description

controlPoint1

Point

The first control point of the curve, which determines the starting tangent of the curve.

controlPoint2

Point

The second control point of the curve, which determines the ending tangent of the curve.

endPoint

Point

The point to which the curve is drawn.

Quadratic Bezier Curve Command

Creates a quadratic Bezier curve between the current point and the specified end point by using the specified control point (controlPoint). q 100,200 300,200 is an example of a valid quadratic Bezier curve command.

Syntax

Q controlPoint endPoint

- or -

q controlPoint endPoint

Term Description

controlPoint

Point

The control point of the curve, which determines the starting and ending tangents of the curve.

endPoint

Point

The point to which the curve is drawn.

Smooth Cubic Bezier Curve Command

Creates a cubic Bezier curve between the current point and the specified end point. The first control point is assumed to be the reflection of the second control point of the previous command relative to the current point. If there is no previous command or if the previous command was not a cubic Bezier curve command or a smooth cubic Bezier curve command, the first control point is assumed to be coincident with the current point. The second control point, the control point for the end of the curve, is specified by controlPoint2. For example, S 100,200 200,300 is a valid smooth cubic Bezier curve command.

Syntax

S controlPoint2 endPoint

- or -

s controlPoint2 endPoint

Term Description

controlPoint2

Point

The control point of the curve, which determines the ending tangent of the curve.

endPoint

Point

The point to which the curve is drawn.

Smooth Cubic Bezier Curve Command

Creates a quadratic Bezier curve between the current point and the specified end point. The control point is assumed to be the reflection of the control point of the previous command relative to the current point. If there is no previous command or if the previous command was not a quadratic Bezier curve command or a smooth quadratic Bezier curve command, the control point is coincident with the current point.

Syntax

T controlPoint endPoint

- or -

t controlPoint endPoint

Term Description

controlPoint

Point

The control point of the curve, which determines the starting and tangent of the curve.

endPoint

Point

The point to which the curve is drawn.

Elliptical Arc Command

Creates an elliptical arc between the current point and the specified end point.

Syntax

A size rotationAngle isLargeArcFlag sweepDirectionFlag endPoint

- or -

a size rotationAngle isLargeArcFlag sweepDirectionFlag endPoint

Term Description

size

x, y pair

The x- and y-radius of the arc.

rotationAngle

Double

The rotation of the ellipse, in degrees.

isLargeArcFlag

Set to 1 if the angle of the arc should be 180 degrees or greater; otherwise, set to 0.

sweepDirectionFlag

Set to 1 if the arc is drawn in a positive-angle direction; otherwise, set to 0.

endPoint

Point

The point to which the arc is drawn.

The Close Command

The close command ends the current figure and creates a line that connects the current point to the starting point of the figure. This command creates a line-join (corner) between the last segment and the first segment of the figure.

Syntax

Z

- or -

z

Point Syntax

Point syntax describes the x-coordinate and y-coordinate of a point.

Syntax

x , y

- or -

x y

Term Description

x

Double

The x-coordinate of the point.

y

Double

The y-coordinate of the point.

Special Values

You can also use the following special values instead of the standard numerical values. These values are case-sensitive.

  • Infinity
    Represents the positive infinity Double value.
  • -Infinity
    Represents the negative infinity Double value.
  • NaN
    Represents the NaN Double value.

You may also use scientific notation. For example, +1.e17 is a valid value.

See Also

PathGeometry
Geometries Overview
Overviews and How-to Topics